Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Dole on November 05, 2005, 01:19:57 PM

Title: RGV 250 Fork in B4
Post by: Dole on November 05, 2005, 01:19:57 PM

Hi again, does anybody know if the Fork from the RGV 250 fits without problems in the Bandit 400.
Can i have some probs. ?
Will the calippers from the Bandit fit ?

Title: RGV 250 Fork in B4
Post by: gsxr400 racer on November 05, 2005, 03:36:54 PM

if they ar USD no they wont fit what you want is fork from a gsxr 400 model gk73 these go right in and are the same  calipers and all pritty much

Title: RGV 250 Fork in B4
Post by: Dole on November 05, 2005, 07:25:44 PM

is the gk73 an usd for ?
does a usd fork fit in a bandit ?

Title: RGV 250 Fork in B4
Post by: gsxr400 racer on November 05, 2005, 08:29:29 PM

gsxr 400 gk73 is not USD (up side down) and they go right in 88-89
An USD will fit if ya buy everything forks ,wheel, tripple trees, clip ons, axle !

Title: RGV 250 Fork in B4
Post by: stripes1976 on November 05, 2005, 10:30:53 PM

but if you want to fit USD's you will need a complete front end! Yokes,forks,wheel,spindle,mudguard etc etc
 :bigok:

Title: RGV 250 Fork in B4
Post by: Red01 on November 06, 2005, 12:46:40 AM

Check out the Fork Swap thread (http://forums.banditalley.net/viewtopic.php?t=197) in the B250/400 FAQ.  :roll:

Title: RGV 250 Fork in B4
Post by: Dole on November 06, 2005, 03:04:23 PM

its a complete front-fork....
i thougt the wheel fits.

(http://i20.ebayimg.com/01/i/04/ac/8c/a0_1_b.JPG)

Title: RGV 250 Fork in B4
Post by: gsxr400 racer on November 07, 2005, 09:12:05 AM

then you are good to go , might have to change the races in the steering head if ya dont have them for tapered bearings like on that front end , wheel might fit but youll need some spacers, as long as all lines up your good! :beers:

Title: RGV 250 Fork in B4
Post by: gsxr400 racer on December 04, 2005, 09:01:18 PM

there is a year rgv that had conventional forks those will bolt right in!