Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: rolandoc on March 24, 2007, 03:00:45 AM

Title: slip on installed and a couple questions
Post by: rolandoc on March 24, 2007, 03:00:45 AM

just installed a slip on to my 93 bandit 400. it starts, idles, and runs pretty smooth but feels like it auctually lost some power over stock. would the backpressure change from taking out the restricted stock exhaust do this or do i need to rejet? i don't have any backfiring at all and i can run choke all the way off and it will idle. any suggestions?

Title: slip on installed and a couple questions
Post by: Banditmax on March 24, 2007, 05:22:23 AM

Sounds like you need to rejet a bit. Try riding it with the choke on half way and see if it gives you more power.

Title: slip on installed and a couple questions
Post by: rolandoc on March 26, 2007, 09:10:24 AM

well i moved the clip on the needle 1 position richer and the thing came back to life. going to bump up the mains a couple later this week.