Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: gsxr400 racer on January 19, 2007, 12:47:40 PM

Title: someone take some measurments for me! rearsets
Post by: gsxr400 racer on January 19, 2007, 12:47:40 PM
from middle of front bolt to middle of front bolt and then from middle of bottom bolt to the middle of where the peg would be mm's please.
cheers
jay
Title: someone take some measurments for me! rearsets
Post by: land-warrior.rus on January 19, 2007, 01:57:29 PM
Will do so in 2 ours if noone will first.Still at work.
And did you mean :from middle of front bolt to middle of FRONT or BACK bolt and then from middle of bottom bolt to the middle of where the peg would be mm's please
Title: someone take some measurments for me! rearsets
Post by: gsxr400 racer on January 19, 2007, 03:01:03 PM
middle of the 2 major front ones like if all that bull shit was cut off and they looked like real rearsets and then from the bottom of the major bolt to the middle of the rear peg! I got these rearsets from japan and they are not for what the add said i bought them for so im trying to figure out what the hell they go on!
Title: someone take some measurments for me! rearsets
Post by: land-warrior.rus on January 19, 2007, 06:00:34 PM
Between top 1 and 2 = 64mm and 2 and 3 = 64mm.
Between botum bolt and modle of the peg 110mm
All mesutments from midle of all holes.
Hope that helps.
Cheets
Title: someone take some measurments for me! rearsets
Post by: gsxr400 racer on January 19, 2007, 06:34:09 PM
thanks got hosed on okshon
Title: someone take some measurments for me! rearsets
Post by: tomacGTi on January 19, 2007, 11:17:32 PM
Jay, you sure they're not for the latest gen of 400?

They look more like b12 and 6 rearsets where they bolt independantly without the lamer plate like the 1st gen ones.

There are some pics here of the newer bikes.
Title: someone take some measurments for me! rearsets
Post by: interfuse on January 19, 2007, 11:51:26 PM
(http://w1.bikepics.com/pics/2002/03/13/bikepics-20947-full.jpg)
Title: someone take some measurments for me! rearsets
Post by: gsxr400 racer on January 20, 2007, 11:38:47 AM
I love the lines of that tank dont know they where supposed to be for a gk76 a newer gsxr 400  heres the numbers i got if someone finds what they fit they go real cheap i have no use for them!

81mm front bolts 121mm bottom to peg