Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: greatmoorred on November 23, 2007, 07:57:18 AM

Title: Speedo cable snapped on my B4
Post by: greatmoorred on November 23, 2007, 07:57:18 AM

Ive disconnected it at the clock and it has snapped about 2 inches out, so ive got the piece from the clock.
However, down at the fork end it looks like i have to take a screw out to remove the cable, but the fork is blocking the screw head.
What to do ....? :annoy:

Title: Re: Speedo cable snapped on my B4
Post by: gsxr400 racer on November 23, 2007, 07:59:48 AM

forks should not be blocking, there is a notch that the speedo drive sits into on the fork tube

Title: Re: Speedo cable snapped on my B4
Post by: greatmoorred on November 23, 2007, 08:15:20 AM

Yeah, ive seen that. It doesnt really line up very well though  :sad:
I can get a small screwy on it, but its just dieing to thread the screw head, and i really dont want to do that !!

Title: Re: Speedo cable snapped on my B4
Post by: Banditmax on November 23, 2007, 08:25:20 AM

Mine fits on the same at both ends just a nut to undo.

Title: Re: Speedo cable snapped on my B4
Post by: gsxr400 racer on November 23, 2007, 08:26:54 AM

yes there are two different kinds of speedo drives

Title: Re: Speedo cable snapped on my B4
Post by: greatmoorred on November 23, 2007, 08:35:53 AM

Ok. Got the nut undone.
How do i post a picture ?
It will help me explain where i am up to.

Title: Re: Speedo cable snapped on my B4
Post by: Red01 on November 23, 2007, 11:06:04 AM

Quote from: greatmoorred on November 23, 2007, 08:35:53 AM

Ok. Got the nut undone.
How do i post a picture ?
It will help me explain where i am up to.

The Images in posts thread (http://forums.banditalley.net/index.php?topic=520.0) is in the Site FAQ.  :bandit: