Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: 1993gsf400 on July 14, 2008, 02:37:56 PM

Title: Stainless Steel Bolt Kit for B4
Post by: 1993gsf400 on July 14, 2008, 02:37:56 PM
Hi everyone,

I found and bought a set of stainless steel bolts for the B4. They are the bolts for the side covers and look really nice compared to the stock ones. Here is the link if anyone is interested:

http://cgi.ebay.co.uk/Suzuki-Bandit-GSF400-Stainless-Engine-Bolt-Kit_W0QQitemZ350030062815QQcmdZViewItem?_trksid=p3286.m20.l1116

It took roughly a week and a half to get them in.

Tony
Title: Re: Stainless Steel Bolt Kit for B4
Post by: bandit250 on July 15, 2008, 09:48:16 PM
Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?
Title: Re: Stainless Steel Bolt Kit for B4
Post by: PitterB4 on July 15, 2008, 11:33:12 PM
Quote from: bandit250 on July 15, 2008, 09:48:16 PM
Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?

Wouldn't take you more than 15 minutes or so to pull and measure them...
Title: Re: Stainless Steel Bolt Kit for B4
Post by: 1993gsf400 on July 16, 2008, 12:47:02 AM
Quote from: PitterB4 on July 15, 2008, 11:33:12 PM
Quote from: bandit250 on July 15, 2008, 09:48:16 PM
Yeah, I've seen them before on Ebay.

I have a 250 Bandit, so I emailed him to see if he could make me a kit. He said he could but needs the length from below the head to the tip for all the bolts. Anybody have the measurements by any chance?

Wouldn't take you more than 15 minutes or so to pull and measure them...

That is probably the easiest way to find out; however, I did encounter a website once where I ordered parts for the 400 and some of the bolts had the measurements listed next to the part number. I need to order some OEM bolts (almost lost my entire headlight to lose bolts!!) so if I run into the website I'll let you know.
Title: Re: Stainless Steel Bolt Kit for B4
Post by: bandit250 on July 16, 2008, 06:56:36 AM
Sorry, I was being lazy but will get around to it soon when I get time. I'm either working or sleeping at the moment! If I get it done anytime soon, I'll post the info and seller again.

That website would be good if you can find it 1993gsf400, thanks.

Title: Re: Stainless Steel Bolt Kit for B4
Post by: 1993gsf400 on July 17, 2008, 03:43:17 PM
Bandit250 - the website does not have parts for a 250  :duh: sorry man.