Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: interfuse on July 03, 2007, 10:37:41 AM
-
My bike developed a strange problem yesterday. I've never had this one before. When cruising at 7k the bike would hicup and drop 1,000 - 2,000 rpm then kick back in. Almost like hitting the rev limiter. If I'm on the gas, no problems.
I'm stumped. I'm obviously going to have to start pulling stuff apart when I have a second. But does anyone have any idea's where to start? Does this sound like a blocked jet or a stuck slide? or does it sound like a bad coil? Water in the gas?
-
lean surge maybe mess with fuel screws or jetting :shock:
-
Thank Jay. I'll focus my efforts there. The only thing that changed was a 10 degree celcius tempeture drop outside. It might have actually fixed itself now the temp has gone back up. I'll see.
-
well, a temperature drop would make it run leaner...
A
-
Temp went up and its fixed. I dropped down the MJ when it got hot and the bike seemed to run better. But I must be a little lean a 7k and the temp drop sent it over the edge. Next time I take the carbs apart I'll go back up.