Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: 96gti8v on May 03, 2011, 12:00:00 PM
-
Rebuilding the Bandit and my taillight is smashed. Any options other than a stockie off of ebay? Something like an LED or clear alternatives taillight?
Also, some wire ID is needed. Upon removing my taillight I found the PO hacked it up pretty good. I found some wires that done have anything running to them. Im assuming the Brown and Black wire are for the license plate light? but in ther second picture I found a bulb all wrapped in electical tape and taped to the frame under the tail. It looks like that same type of bulb in the taillight.
(http://img.photobucket.com/albums/v306/96GTI8v/a248d9be.jpg)
(http://img.photobucket.com/albums/v306/96GTI8v/df0ceba8.jpg)
-
Hi
not sure if all the B4 back lights are the same , but on mine ,the number plate is lit by the back light bulb & a clear patch in the under side of the tail light plastic.
(http://i1183.photobucket.com/albums/x465/a-N-i-M-a-L/Bike%20Bits/IMAG0204.jpg)
OK, just looked in the manual , and if im reading the blurry little letters correct its Brown and Black w/White stripe are the light wires.
Also the manual shows every wiring Diag having a licence bulb ( with the same color wires , fed from the back light wires ).
The White w/Black stripe is the brake light wire.
My B4 Jap import , dont have a separate bulb :(
lol