« previous next »
Pages: [1]

Author Topic: year model  (Read 3934 times)

Offline BoggyB

  • New user!
  • *
  • Posts: 3
year model
« on: November 30, 2012, 06:29:31 PM »
 :duh:Hey guys.

I'm new here

I'm having some trouble with identifying the year model of my 400 bandit. Here in South Africa the record keeping is rather shite, so I was wondering if you guys could help me out.

The vin here say GK75A103838 and engine number say K707115103

Thanks for the help in advance
Logged

Offline pmackie

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1149
Re: year model
« Reply #1 on: November 30, 2012, 11:45:14 PM »
Hey BoggyB

Some decent info in the Wiki section at the top of this site. I'm not a 400 guy, but I did some clicking just for fun. This site is referenced in the Wiki:

http://www1.synapse.ne.jp/s-hara/bandit/ban-hist400e.html

Based on what it says here, it looks to me that yours is a GSF400K model made in 1989. But, as I said, I'm not a Bandit 400 guy.

You might want to poke around the other referenced sites. Hope this helps.
Logged
Paul
2002-GSF600S, Progressive Fork Springs, B12 Shock,
SS Brake lines, EBC HH pads, Leo Vince Ex & Kappa bags.
Ex Bike Mechanic (late 70's), somewhat rusty
32 years in the Fuel/lubes industry(Retired)

Offline BoggyB

  • New user!
  • *
  • Posts: 3
Re: year model
« Reply #2 on: December 01, 2012, 06:06:23 AM »
Thanks a lot man. The reason I'm searching for the year model is cause I need to buy a new igniter so I can test the repairs on my current unit. These things are so expensive. :banghead: I'm going to test my entire ignition system today to eliminate any other problems that can cause my igniter to blow a capp
Logged

Offline BoggyB

  • New user!
  • *
  • Posts: 3
Re: year model
« Reply #3 on: March 20, 2013, 09:31:49 AM »
I'm still having trouble with my bandit. I've got a new cdi 32900 10d30 and I was wondering if anyone knows what year model bike this cdi is from, because I'd like to change the firing rotor on the flywheel to match the new cdi. HELP PLEASE
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: year model
« Reply #4 on: March 22, 2013, 08:26:21 PM »
According to  my jap manual you have a K model 1989, Nk 1990 would start GK75A-106157.
Without looking in the parts book i can not say what cdi part number this runs.

There is a post on here that covers renewing the caps in the cdi, not too difficult and involves re soldering 5 caps.
Logged

Offline Squishy

  • Board Homesteader!
  • ***
  • Posts: 417
Re: year model
« Reply #5 on: April 08, 2013, 06:51:30 AM »
Quote from: Chris H on March 22, 2013, 08:26:21 PM
According to  my jap manual you have a K model 1989, Nk 1990 would start GK75A-106157.
Without looking in the parts book i can not say what cdi part number this runs.

There is a post on here that covers renewing the caps in the cdi, not too difficult and involves re soldering 5 caps.
What jap manual is that?
I had a hard time finding any reliable info on GSF400 buildyear/numbers and only my local garage could check it in his system
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: year model
« Reply #6 on: April 08, 2013, 09:01:39 AM »
Ive got the Japanese factory manual that covers all first gen models.
Logged

Offline Squishy

  • Board Homesteader!
  • ***
  • Posts: 417
Re: year model
« Reply #7 on: April 08, 2013, 09:30:11 AM »
Quote from: Chris H on April 08, 2013, 09:01:39 AM
Ive got the Japanese factory manual that covers all first gen models.
Care to scan the part about the #VIN?  :bandit:
Logged

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: year model
« Reply #8 on: April 08, 2013, 06:47:27 PM »
Sorry mate can not do that as each model has a separate section and the engine number is listed there.
If i can find some spare time i will list each model start number.
Logged
Pages: [1]
« previous next »