Author Topic: Air box screen???  (Read 17323 times)

Offline Fordtech

  • Board Homesteader!
  • ***
  • Posts: 66
Air box screen???
« on: April 02, 2006, 06:03:59 PM »
Anyone taken the air box screen out? If so...did you re-jet(AGAIN)?? I am thinking of taking it out as trying to put the nasty thing back on the carbs is a job and a half!!!!!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Air box screen???
« Reply #1 on: April 03, 2006, 12:42:54 PM »
Screen? What screen?
AFAIK, the only thing inside the airbox is the filter.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline tacoman

  • Board Homesteader!
  • ***
  • Posts: 793
screen
« Reply #2 on: April 03, 2006, 02:15:19 PM »
Do you mean the snorkel?

Offline rider123

  • Board Homesteader!
  • ***
  • Posts: 991
Air box screen???
« Reply #3 on: April 03, 2006, 04:27:20 PM »
If you mean the snorkel then you need to shim the needles 2 .020 #4 shims with a slip on exhaust. I may still have some if you want me to send you some. Your mixture screws are then going to have to be turned out to around 3 turns or so. If you want to keep the airbox completely stock you can just use 1 shim and turn the mixture screws out 1/4 turn or so outside stock around 2.75 and it works fine like that but you're not getting the full benefit with that piddly snorkle in there. Unless you are sort of having an idea of what you're doing I would suggest keeping the bike stock and buying a plug and play jet kit. It will work 100% that way.

Or do you mean the entire airbox lid? Then you will most definately need to re-jet. Probably with something crazy like 140 mains or something huge. I wouldn't try it unless you're a super tuner.
2005 Bandit 1200, Modified Holeshot Stage 1 with 17.5 pilots 2.75 turns out, and 110 mains 5 shims. Muzzy Slip on w/mid-pipe, stock filter. 1.5" hole in the airbox lid.

Offline DaveG

  • Board Homesteader!
  • ***
  • Posts: 151
Air box screen???
« Reply #4 on: April 03, 2006, 04:44:50 PM »
mine has a screen just in front of the carbs.

may keep larger rodents from entering carb throat if stored with filter removed.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Air box screen???
« Reply #5 on: April 03, 2006, 05:34:18 PM »
Hmmm... just looked at the parts book for the 1G & 2G and neither one shows any screen, just the filter, boc, lid, snorkel, etc.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline Erik Schorken

  • New user!
  • *
  • Posts: 7
yes, there is a screen
« Reply #6 on: April 03, 2006, 06:06:09 PM »
Red01, It's behind the filter.

To remove it just push hard in the center and it will fold in and then pull it out. You will not be able to reinstall it as it was put in there before they glued the two halves of the airbox together. I took mine out as per Holeshot stage 2 with airbox instructions.

Offline jesjames9598

  • TURBO TYPER!
  • **
  • Posts: 32
Air box screen???
« Reply #7 on: April 04, 2006, 08:02:47 AM »
I think the reson nobody knows of the screen is that as soon as air box comes off first time screen gets thrown to the shit house where it belongs.Once you have done that then you can throw the air box to the shitter as well,pods are the way to go.

Offline Erik Schorken

  • New user!
  • *
  • Posts: 7
Screen
« Reply #8 on: April 04, 2006, 08:23:22 AM »
You don't just throw it out. It has to be forcefully removed. It's a pretty stiff screen with a folded metal border that is recessed into a groove on the ABS plastic airbox.

Offline Fordtech

  • Board Homesteader!
  • ***
  • Posts: 66
Air box screen???
« Reply #9 on: April 04, 2006, 08:49:53 PM »
Ok....lotsa replies....Snorkel is gone, I am running a Yosh slip on with a Dynojet kit, would like to retain stock airbox as I do not feel pods are the way to go, , especially in the rain. Needles are where DJ recommends for Canada, seems to pull nice and strong, but will removing the screen upset anything? The bike is a 99.....with Holeshot drop in cams, advancer, Yosh, Dyno jet......Just need to know before binning the damn thing!!!!!!!

Offline jwalters

  • Board Homesteader!
  • ***
  • Posts: 201
    • http://genome.uiowa.edu/~jwalters
Air box screen???
« Reply #10 on: April 06, 2006, 11:34:13 AM »
I had the same screen on my '97 B12.  I removed that screen because it was bent and didn't want to stay in the box anymore.  That screen doesn't restrict flow enough to cause any problems.  I removed mine, and my Ivans 1st stage jet kit was uneffected.
1997 Suzuki Bandit 1200S
1972 Honda CB 750 K2 Cafe Racer
1985 RZ 350
2006 DR650SE

Nesba #013

Offline Fordtech

  • Board Homesteader!
  • ***
  • Posts: 66
Air box screen???
« Reply #11 on: April 06, 2006, 11:52:47 AM »
Thanx for the info.....appreciate it muchly!!!!!!!!!!!

Offline jwalters

  • Board Homesteader!
  • ***
  • Posts: 201
    • http://genome.uiowa.edu/~jwalters
Air box screen???
« Reply #12 on: April 06, 2006, 11:58:09 AM »
I suppose the technical term for the "screen" is "air filter filter"   :grin:  :lol:

Red01, feel free to add this to the FAQ if you want.  :beers:
1997 Suzuki Bandit 1200S
1972 Honda CB 750 K2 Cafe Racer
1985 RZ 350
2006 DR650SE

Nesba #013