Author Topic: 02 Bandit 600s chain/sprocket  (Read 12911 times)

Offline Kamzilla

  • Board Homesteader!
  • ***
  • Posts: 104
02 Bandit 600s chain/sprocket
« Reply #15 on: April 11, 2005, 10:03:27 AM »
Dave,

I can't seem to find it in 112 link lenght.  The closest I see is 120.
Kamil
Formerly a '96 B6S - Now owned by steel96

1999 Honda VFR

Offline chupacabra

  • Board Homesteader!
  • ***
  • Posts: 329
chain
« Reply #16 on: April 12, 2005, 06:33:12 AM »
Yeah, you need to get a chain riveter/cutter tool. Its ez to do if you have the right tools. Or you can get a shop to do it for you.
Dave . . . San Diego, California
1996 GSF600S Marble Italian Red
I bought new in sept of 95
D.I.D. 530ZVM gold x-ring chain
Pirelli Diablo 120/60F & Strada 160/60R
Progressive fork springs
H.S. HD rear axle nut & washer
Hole Shot 17" comp1 can

Offline Kamzilla

  • Board Homesteader!
  • ***
  • Posts: 104
02 Bandit 600s chain/sprocket
« Reply #17 on: April 12, 2005, 10:20:46 AM »
Thanks a lot guys.  I changed my order to the DID 530 ZVM.  Hope to enjoy it a lot more than the current POS I have.
Kamil
Formerly a '96 B6S - Now owned by steel96

1999 Honda VFR

Offline adam_mcmahon

  • New user!
  • *
  • Posts: 2
02 Bandit 600s chain/sprocket
« Reply #18 on: April 17, 2005, 12:40:36 AM »
as others have said the 520 chain does work. i have JT Sprockets 14/38 on a 99 B6with a x-ring chain. its not the wheelie monster but the top end is like adding another gear to the top.

Offline Landry

  • Board Homesteader!
  • ***
  • Posts: 277
02 Bandit 600s chain/sprocket
« Reply #19 on: April 30, 2005, 01:52:50 PM »
'Sup guys?

I'm doing a chain/sprocket change, and I'm thinking about going with the a 530 x-ring chain and sprockets.  A few questions:

Where to get them?

What is the size of the front sprocket nut?

Do I need one of those Motion-Pro chain riveters to do it?

Do I really need to buy a set, or should I buy the sprockets separately from the chain?
Ever noticed that they don't make helmets out of bone? There's a reason.

Offline chupacabra

  • Board Homesteader!
  • ***
  • Posts: 329
chain
« Reply #20 on: May 02, 2005, 06:11:07 PM »
I got my chain from DennisKirk.com ,I'm very happy.
I use a 1 1/4 inch socket.
Motion-Pro chain riveters work great on the D.I.D. chians. You'll want one to cut the chain to the corect size.
You should buy the sprockets separately IMHO. Shop around and get what you like.
Dave . . . San Diego, California
1996 GSF600S Marble Italian Red
I bought new in sept of 95
D.I.D. 530ZVM gold x-ring chain
Pirelli Diablo 120/60F & Strada 160/60R
Progressive fork springs
H.S. HD rear axle nut & washer
Hole Shot 17" comp1 can