Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: JamieK on January 20, 2007, 06:38:26 PM

Title: 06 B12 Dyno Baseline
Post by: JamieK on January 20, 2007, 06:38:26 PM

I am about to install a Muzzy full exhaust with the HoleShot stage 1 jet kit and timing advancer so I decided to do a baseline dyno run to see what gains I will be getting. This was the first dyno run for me so it was fairly exciting. It was done at a Harley shop but the guys were very interested in the ol' B12...and they were a bit surprised by the results. The bike has a whopping 260kms on it so I expect the engine to free up a bit when I can get riding again in the spring. I am quite happy with the baseline results with 100.27HP and 73.09ft/lbs of torque. In a couple weeks I will do another run and post those results as well.

Gratuitous bragging rights pic  :wink:

(http://i139.photobucket.com/albums/q298/jbk_edm/Bandit/BanditDyno001.jpg)

Title: 06 B12 Dyno Baseline
Post by: Red01 on January 21, 2007, 10:17:17 AM

They'll probably be even more interested when they see the big jump in the numbers after the pipe & jet kit!  :motorsmile:

Title: 06 B12 Dyno Baseline
Post by: JamieK on January 23, 2007, 03:32:19 PM

I should be taking it back there the first weekend in Feb :wink:

Removed the stock exhaust and installed the Muzzy last night. Took off almost 18lbs! The new exhaust is fairly loud but does have a nice burble at idle. Of course I 'had' to fire it up with the open header which was expectedly loud, but, once installed I was surprised how little the muffler muffled :wink: This weekend I'll be installing the jet kit and timing advancer.