Author Topic: opinions on how different exhausts sound (Read 8005 times)

solman · « **Reply #15 on:** January 06, 2007, 03:41:54 AM »

Quote

my wife said she can hear me going down the road for 1/2 mile. That is a good thing

That means that the cops can hear you coming too.

Big Bo · « **Reply #16 on:** January 18, 2007, 04:57:32 AM »

Had a Scorpion, went to a Two Brothers. Both sound great. The TB is a little louder, throatier.

aussiebandit · « **Reply #17 on:** January 19, 2007, 12:43:46 AM »

Quote from: "solman"

Quote
my wife said she can hear me going down the road for 1/2 mile. That is a good thing

That means that the cops can hear you coming too.

And that's why you keep the OEM exhaust in the 'shed' so you can, relativlely quickly, get the bike back on the road after the cops have finished with it....

I'm leaning towards the Staintune that has the removable insert, or the Laser equivelant.

wheeliekev · « **Reply #18 on:** February 07, 2007, 08:30:31 AM »

i run hindle headers with a cut down akro end can, mind you the induction noise from the k &n's is louder

CWO4GUNNER · « **Reply #19 on:** February 07, 2007, 09:39:21 PM »

OK here is what a Yosh slip-on sounds like at idle:

HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!!

OK now go buy one..

Red01 · « **Reply #20 on:** February 07, 2007, 10:11:54 PM »

Quote from: "CWO4GUNNER"

OK here is what a Yosh slip-on sounds like at idle:

HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!!

OK now go buy one..

Is that the race can, or the quieter Zyclone series?

CWO4GUNNER · « **Reply #21 on:** February 08, 2007, 12:45:07 AM »

Actually the cheap RS3 stainless oval

Quote from: "Red01"

Quote from: "CWO4GUNNER"
OK here is what a Yosh slip-on sounds like at idle:

HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!-RUM-HUMM!-HUMM!-HUMM!!

OK now go buy one..

Is that the race can, or the quieter Zyclone series?

Hydrogen · « **Reply #22 on:** March 26, 2007, 05:00:52 PM »

Hi all,

The best combo I've found for sound is a holeshot header with a TBR NFSU Long can. I just wish I could get my motor finished so I can hear it again..

-H

EDIT: Oh yeah, as far as the Dyno goes, dyno brand dyno show between 10% and 20% higher numbers than others (FactoryPro)

okbandit · « **Reply #23 on:** April 08, 2007, 04:10:39 AM »

I have a D&D BOLT ON and it dyno'd at 116 with an ivans kit that was jetted too rich (A/F in the low 12's). Sound is very low toned and always gets noticed when I'm on it. If you want loud and cheap, this is a good choice. Also ran it with Dale's stage 2 with pods and got the same result with better main jet installed.