Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: quexpress on March 15, 2012, 08:32:04 PM

Title: 1st and 2nd generation GSF1200: timing and duration specs?
Post by: quexpress on March 15, 2012, 08:32:04 PM

Hi!

The exhaust cams on the 1st generation B12 (up to 2000) have more lift than the 2nd generations ones (2001-2005).

The 2nd generation produces a bit more low end torque.

I have been searching for the timing and duration specs of the camshafts for both generations, but did not have any success.

Any insight would be greatly appreciated!

Thank you!  :grin:

Normand

Title: Re: 1st and 2nd generation GSF1200: timing and duration specs?
Post by: rider123 on March 16, 2012, 11:22:58 AM

This may help:

http://www.portablepct.com/fastlarry/banditfaq.htm

Title: Re: 1st and 2nd generation GSF1200: timing and duration specs?
Post by: quexpress on March 16, 2012, 11:27:36 AM

Quote from: rider123 on March 16, 2012, 11:22:58 AM

This may help:

http://www.portablepct.com/fastlarry/banditfaq.htm

Lots of great info but ... no cam timing and duration specs.

Thanks!

Title: Re: 1st and 2nd generation GSF1200: timing and duration specs?
Post by: PaulVS on March 16, 2012, 12:16:16 PM

I don't think there's any difference between 1st & 2nd Gen camshafts.

Where did you get that info from?

Title: Re: 1st and 2nd generation GSF1200: timing and duration specs?
Post by: quexpress on March 16, 2012, 12:26:14 PM

Quote from: PaulVS on March 16, 2012, 12:16:16 PM

I don't think there's any difference between 1st & 2nd Gen camshafts.

Where did you get that info from?

From Suzuki service manuals.