Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: Ar-Bandit on December 21, 2006, 08:57:32 PM

Title: a yes or no question
Post by: Ar-Bandit on December 21, 2006, 08:57:32 PM

All I need to know is if the bandit 2002 bandit 1200 arm will fit the 2002 bandit 600 with no probelm or any other work to the arm.

Title: a yes or no question
Post by: solman on December 23, 2006, 12:16:05 AM

Never had a 600, so I couldn't tell you.  Why do you want to switch?

Title: hey
Post by: Ar-Bandit on December 23, 2006, 05:42:07 PM

its not that I'm wanting to switch them for a real reason its just that I need a new arm for my bike and all and I can't find a 600 and can only find 1200 arms and I need to get them changed out

Title: Part numbers rarely lie
Post by: gearset01 on December 24, 2006, 10:31:46 AM

Go to Ron Ayers site and go to the Microfichs and check part numbers !!!!!
PIN

Title: a yes or no question
Post by: MrBAMcClain on December 24, 2006, 04:04:15 PM

YES...
 
Get the swingarm, wheel axel and spacers and brake stay from the 1200 and mount it. No mods needed.
Note: You NEED the axel and spacers. May as well run the bigger tire if you can get the whole setup for cheap.

Here's an old pic when I was modding my 600 with the 1200 swingarm and 600 wheel.


(http://www.imagestation.com/picture/sraid202/p6dd5e4b4cf18555070052fc020f3830e/efeea44c.jpg)