Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: ttewejnodnarb on September 26, 2005, 07:31:27 PM

Title: A/F Screws
Post by: ttewejnodnarb on September 26, 2005, 07:31:27 PM

Hello All,

My 98 b12s was acquired with a Holeshot SII jet kit w/pods.  I looked in the Haynes manual for a visual of the A/F screws (assuming that the previous owner had the caps drilled out to install the kit?).  I'm just getting to know the bike...does anyone have a photo they could post or the number on a bikebandit schematic that shows where the screws are located?

Thanks for the help!

Title: A/F Screws
Post by: PitterB4 on September 26, 2005, 08:32:56 PM

Below is a pic from this (http://forums.banditalley.net/viewtopic.php?t=196) FAQ.  The perspective of the pic is the underside of the intake side of the carb.

(http://banditalley.com/tech/faqs/jetkit101/7.jpg)

Title: A/F Screws
Post by: ttewejnodnarb on September 26, 2005, 09:54:21 PM

Well, maybe next time I could get a more detailed response? :monkeymoon:
Just kidding!

Awsome pics, thanks for the help, Pitter! :thanks:

Title: A/F Screws
Post by: PitterB4 on September 26, 2005, 10:18:48 PM

:bigok: