Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: ventYl on February 25, 2014, 07:20:35 AM

Title: Carb leaking even after complete cleanup/setup
Post by: ventYl on February 25, 2014, 07:20:35 AM

Hi, I have issues with leaking Keihin carbs in B600 1996. Sometimes, one or two of carbs are strongly leaking. I've cleaned all carbs, set float height to 17mm. After this setup, carbs were leaking even stronger. Later I swapped needle valves and checked that nothing leaks when floats are depressed with float bowls removed. Needles were tight and nothing leaked. Then I adjusted float height to 18mm, but even after this setup one carb is leaking. Does anybody have any clue what to try to stop them from leaking?