Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: Poorkid on December 01, 2005, 03:29:47 PM

Title: carb sync
Post by: Poorkid on December 01, 2005, 03:29:47 PM

Will some one please direct me to a very detailed write up on carb syncronizing? My bike needs it and I don't know how to do it.

Thanks Jeremy

Title: carb sync
Post by: PaulVS on December 01, 2005, 05:01:57 PM

click here...

http://www.geocities.com/mwtredb12/carbsync1.html

Title: carb sync
Post by: vadim on December 01, 2005, 05:23:01 PM

Also check out this thread http://forums.banditalley.net/viewtopic.php?t=2355 for a cheap carb sync tool setup.

Title: carb sync
Post by: PitterB4 on December 01, 2005, 05:24:31 PM

I don't have time to post the link at the moment but go to Motion Pro's (popular maker of synch tools) web site.  You can d/l a pdf of their instruction manual there.  It's pretty detailed.

Title: carb sync
Post by: ray nielsen on December 01, 2005, 10:15:28 PM

The instructions look good except that on my 2003 Bandit 1200 the fuel line is 3/8" inside diameter, not 5/16" as noted.  

Vibration will be minimal with properly synchronized carburetors as well as providing smoother slow speed running.  

A fine, helpful treatise over all.

Title: carb sync
Post by: Poorkid on December 05, 2005, 11:28:10 PM

thanks for the links and help