Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: kylebach14 on June 22, 2015, 05:51:31 PM

Title: Do I need a Stage 3 kit?
Post by: kylebach14 on June 22, 2015, 05:51:31 PM

02 Bandit 1200 Pod Filters, Shorty Muffler and I believe stock jetting. Just changed the plugs and had my carbs cleaned. My carb guy said that they were pretty clean before he cleaned em, but said I may possibly need a kit because of the pods.Here are some of the things Im experiencing.
-Takes forever to warm up
-Bucks and coughs at low rpms (tough to ride around 3k)
-No low down power
-Power comes on at 6k

Right now my fuel screws are turned out nearly 4 turns.
If anyone has a 01 and after 1200 with a dynojet stage 3 kit, what do you have your clips and screws set at? Ive heard the original instructioms are kinda off.

Title: Re: Do I need a Stage 3 kit?
Post by: ventYl on June 23, 2015, 03:48:23 AM

Well most probably yes. Goldern rule says that (IIRC) if your fuel screw is turned more than 2.5 turns out you definitely need larger jet (not necessary nearest larger).