Author Topic: dropping a tooth  (Read 3993 times)

Offline mattydefran

  • TURBO TYPER!
  • **
  • Posts: 40
dropping a tooth
« on: October 17, 2005, 12:03:58 PM »
Hey guys,

I am considering dropping a tooth on my front sprocket for a little added snap.  :banana:

I read a lot of the old posts on here about gearing, but I just need to ask for my own benefit. If I drop one in the front I can use the same stock 530 chain right? I'll just have to tighten it up a little more. My 04 b12s only has like 3,000 miles on it so I really can't see the sense in tossing out a perfectly good chain.

 :thanks:
Wish in one hand, crap in the other, and see which one fills up first

2004 Bandit 1200S
1980 GS850L (Project)
1997 RM 250
1985 Madura 1200 (Scored a Freebie)

Offline chevsuz12

  • Board Homesteader!
  • ***
  • Posts: 249
dropping a tooth
« Reply #1 on: October 17, 2005, 01:25:18 PM »
Yep, it works great.  You will not believe how much of a difference this mod will make for acceleration.  If you thought your bike pulled hard before, this will blow your mind!
B12 Streetfighter!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
dropping a tooth
« Reply #2 on: October 17, 2005, 03:37:03 PM »
You'll be fine with the chain, both in length and terms of running it on a new sprocket.  :bigok:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline mattydefran

  • TURBO TYPER!
  • **
  • Posts: 40
dropping a tooth
« Reply #3 on: October 17, 2005, 05:30:24 PM »
Quote from: "chevsuz12"
If you thought your bike pulled hard before, this will blow your mind!


Thanks alot guys. I will be looking forward to the added performance  :motorsmile:

I must be a boyscout, cause I am pitching a tent. Is that wrong?
Performance really excites me maybe a little too much.  :danger:
Wish in one hand, crap in the other, and see which one fills up first

2004 Bandit 1200S
1980 GS850L (Project)
1997 RM 250
1985 Madura 1200 (Scored a Freebie)

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
dropping a tooth
« Reply #4 on: October 17, 2005, 07:24:16 PM »
Gear ratios for 15/45

INPUTS    1998 GSF1200S Bandit Gearing Calculator        
Front Sprocket (Teeth) 15          
Rear Sprocket (Teeth)  45          
Final Ratio   3.00          
Primary Ratio 1.565          
Rear Tire Diameter (inches)  24.79          
Tire Circumference (Inches)  77.88          
GEAR 1  2  3  4  5
Internal Gear Ratio   2.384 1.631 1.250 1.045 0.913
Overall Gear Ratio   11.193   7.658 5.869 4.906 4.287
 RPM  MPH   MPH   MPH   MPH   MPH
 1,500  9.9   14.4  18.8  22.5  25.8
 2,000    13.2  19.3  25.1  30.1  34.4
 2,500    16.5  24.1  31.4  37.6  43.0
 3,000    19.8  28.9  37.7  45.1  51.6
 3,500    23.1  33.7  44.0  52.6  60.2
 4,000    26.4  38.5  50.3  60.1  68.8
 4,500    29.7  43.3  56.5  67.6  77.4
 5,000    32.9  48.2  62.8  75.2  86.0
 5,500    36.2  53.0  69.1  82.7  94.6
 6,000    39.5  57.8  75.4  90.2  103.2
 6,500   42.8  62.6  81.7  97.7  111.8
 7,000   46.1  67.4  88.0  105.2 120.4
 7,100   46.8  68.4  89.2  106.7 122.2
 7,200   47.4  69.3  90.5  108.2 123.9
 7,300   48.1  70.3  91.7  109.7 125.6
 7,400   48.8  71.3  93.0  111.2 127.3
 7,500   49.4  72.2  94.2  112.7 129.0
 7,600   50.1  73.2  95.5  114.2 130.8
 7,700   50.7  74.2  96.8  115.7 132.5
 7,800   51.4  75.1  98.0  117.2 134.2
 7,900   52.1  76.1  99.3  118.8 135.9
 8,000   52.7  77.0  100.5 120.3 137.6
 8,100   53.4  78.0  101.8 121.8 139.4
 8,200   54.0  79.0  103.0 123.3 141.1
 8,300   54.7  79.9  104.3 124.8 142.8
 8,400   55.3  80.9  105.6 126.3 144.5
 8,500   56.0  81.9  106.8 127.8 146.2
 8,600   56.7  82.8  108.1 129.3 148.0
 8,700   57.3  83.8  109.3 130.8 149.7
 8,800   58.0  84.8  110.6 132.3 151.4
 8,900   58.6  85.7  111.8 133.8 153.1
 9,000   59.3  86.7  113.1 135.3 154.8
 9,100   60.0  87.6  114.4 136.8 156.6
 9,200   60.6  88.6  115.6 138.3 158.3
 9,300   61.3  89.6  116.9 139.8 160.0
 9,400   61.9  90.5  118.1 141.3 161.7
 9,500   62.6  91.5  119.4 142.8 163.4
 9,600   63.3  92.5  120.6 144.3 165.2
 9,700   63.9  93.4  121.9 145.8 166.9
 9,800   64.6  94.4  123.2 147.3 168.6
 9,900   65.2  95.3  124.4 148.8 170.3
 10,000  65.9  96.3  125.7 150.3 172.1
 10,100  66.5  97.3  126.9 151.8 173.8
 10,200  67.2  98.2  128.2 153.3 175.5
 10,300  67.9  99.2  129.4 154.8 177.2
 10,400  68.5  100.2 130.7 156.3 178.9
 10,500  69.2  101.1 131.9 157.8 180.7
If I didn't have a Suzuki, I would have a Kawasaki

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
dropping a tooth
« Reply #5 on: October 17, 2005, 07:26:15 PM »
Ratios for 14/45

INPUTS    1998 GSF1200S Bandit Gearing Calculator        
Front Sprocket (Teeth) 14          
Rear Sprocket (Teeth)  45          
Final Ratio   3.21          
Primary Ratio 1.565          
Rear Tire Diameter (inches)  24.79          
Tire Circumference (Inches)  77.88          
GEAR 1  2  3  4  5
Internal Gear Ratio   2.384 1.631 1.250 1.045 0.913
Overall Gear Ratio   11.992   8.205 6.288 5.257 4.593
 RPM  MPH   MPH   MPH   MPH   MPH
 1,500  9.2   13.5  17.6  21.0  24.1
 2,000    12.3  18.0  23.5  28.1  32.1
 2,500    15.4  22.5  29.3  35.1  40.1
 3,000    18.4  27.0  35.2  42.1  48.2
 3,500    21.5  31.5  41.1  49.1  56.2
 4,000    24.6  36.0  46.9  56.1  64.2
 4,500    27.7  40.5  52.8  63.1  72.3
 5,000    30.7  44.9  58.6  70.1  80.3
 5,500    33.8  49.4  64.5  77.2  88.3
 6,000    36.9  53.9  70.4  84.2  96.3
 6,500    40.0  58.4  76.2  91.2  104.4
 7,000   43.0  62.9  82.1  98.2  112.4
 7,100   43.7  63.8  83.3  99.6  114.0
 7,200   44.3  64.7  84.4  101.0 115.6
 7,300   44.9  65.6  85.6  102.4 117.2
 7,400   45.5  66.5  86.8  103.8 118.8
 7,500   46.1  67.4  88.0  105.2 120.4
 7,600   46.7  68.3  89.1  106.6 122.0
 7,700   47.4  69.2  90.3  108.0 123.6
 7,800   48.0  70.1  91.5  109.4 125.3
 7,900   48.6  71.0  92.7  110.8 126.9
 8,000   49.2  71.9  93.8  112.2 128.5
 8,100   49.8  72.8  95.0  113.6 130.1
 8,200   50.4  73.7  96.2  115.0 131.7
 8,300   51.0  74.6  97.3  116.4 133.3
 8,400   51.7  75.5  98.5  117.8 134.9
 8,500   52.3  76.4  99.7  119.3 136.5
 8,600   52.9  77.3  100.9 120.7 138.1
 8,700   53.5  78.2  102.0 122.1 139.7
 8,800   54.1  79.1  103.2 123.5 141.3
 8,900   54.7  80.0  104.4 124.9 142.9
 9,000   55.3  80.9  105.6 126.3 144.5
 9,100   56.0  81.8  106.7 127.7 146.1
 9,200   56.6  82.7  107.9 129.1 147.7
 9,300   57.2  83.6  109.1 130.5 149.3
 9,400   57.8  84.5  110.3 131.9 150.9
 9,500   58.4  85.4  111.4 133.3 152.6
 9,600   59.0  86.3  112.6 134.7 154.2
 9,700   59.7  87.2  113.8 136.1 155.8
 9,800   60.3  88.1  114.9 137.5 157.4
 9,900   60.9  89.0  116.1 138.9 159.0
 10,000  61.5  89.9  117.3 140.3 160.6
 10,100  62.1  90.8  118.5 141.7 162.2
 10,200  62.7  91.7  119.6 143.1 163.8
 10,300  63.3  92.6  120.8 144.5 165.4
 10,400  64.0  93.5  122.0 145.9 167.0
 10,500  64.6  94.4  123.2 147.3 168.6
If I didn't have a Suzuki, I would have a Kawasaki

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
dropping a tooth
« Reply #6 on: October 17, 2005, 07:56:23 PM »
Quote from: "mattydefran"
I must be a boyscout, cause I am pitching a tent. Is that wrong?
Performance really excites me maybe a little too much.  :danger:


TMI, man, TMI!  :duh:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)