Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: shortfur7 on April 19, 2007, 11:21:36 PM

Title: G1 and G2 exhaust
Post by: shortfur7 on April 19, 2007, 11:21:36 PM

My headpipes from my 1999 b12 are getting kinda rusty and have gotten banged up some
So what i was wondering is will the headpipes from the 2nd gen B12 will fit the 1 gen B12
thanks

Title: G1 and G2 exhaust
Post by: solman on April 20, 2007, 06:03:10 AM

It's the same motor and frame, so I don't see why not.

Title: G1 and G2 exhaust
Post by: Red01 on April 20, 2007, 11:55:29 AM

Well, it's NOT the same frame, but the header pipes will fit between the two anyway.  :bigok:

Title: G1 and G2 exhaust
Post by: solman on April 20, 2007, 01:50:54 PM

So the frame is different?  How different is it, tube size, shape, etc?   I figured that it is the same basic frame, but different to accomodate the different plastic pieces.

Title: frame
Post by: okbandit on April 21, 2007, 12:39:24 PM

The gen 2 has a steeper head angle.  The tail section tubing is different because of the straight tube coming down under the tank and the angular intersection at the air box area.  I think the bottom is pretty much the same (under motor).