Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: ttewejnodnarb on February 08, 2006, 12:41:14 AM

Title: G2 brake caliper emergency
Post by: ttewejnodnarb on February 08, 2006, 12:41:14 AM

I'm installing 6 pots from a G2 and I am wondering if they will work without #7 on the fiche...I think the pad spring is incorporated into this cover that didn't come with the calipers I bought.

(http://i23.photobucket.com/albums/b361/ttewejnodnarb/front_caliper.jpg)

Should I plan on running to the shop to purchase the part before I start?  I'd like to get them done tomorrow.

Thanks!! :beers:

Title: G2 brake caliper emergency
Post by: rider123 on February 08, 2006, 12:47:14 AM

Well just to be safe if you're going to run without it and not sure if it's entirely nessesary I would give myself extra room for braking and brake with BOTH front and back so if the front goes you still have the back under braking to compensate. Even a seemingly in-consequential brake part may be critical. Be carefull untill you know for certain it's not nessesary.

Title: G2 brake caliper emergency
Post by: jeepskate99 on February 08, 2006, 08:41:29 AM

#7 is a shim to hold the pads from rattling while not in use.  You really don't want t go without them.  The rattling will wear at the pads slowly and be annoying/embarrassing everytime you ride.

Title: G2 brake caliper emergency
Post by: ttewejnodnarb on February 08, 2006, 08:59:14 AM

Thanks guys...I'll call the shop this morning and see if they have it n stock.