Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: tannerismyhero on April 14, 2006, 05:25:25 PM

Title: High beam wiring
Post by: tannerismyhero on April 14, 2006, 05:25:25 PM

Does anyone know which pair of wires going into the speedo is set aside for the high beam. I am trying to get the blue light to come up but cant. I have taken the ohm meter to all the wires and they show that they are all making contact to the board in the speedo. I was going to try and see if I pull any voltage when I switch them on.

Title: High beam wiring
Post by: Red01 on April 14, 2006, 05:43:38 PM

Do you have a schematic?
If not, you should be able to find one in the downloadable manuals in the Member's section.

Title: High beam wiring
Post by: tannerismyhero on April 14, 2006, 10:50:24 PM

Oh cool. I didn't know that we had the wiring schematic in there too. I saw the manual.