Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: redbandit12 on January 22, 2008, 04:32:25 PM

Title: mikuni RS carbs
Post by: redbandit12 on January 22, 2008, 04:32:25 PM

anybody ever try and respace a set of mikuni rs carbs? if it can be done what is needed?

Title: Re: mikuni RS carbs
Post by: Bob Holland on January 23, 2008, 08:18:47 AM

On mine, there are two sets of holes, in all the parts, which leads me to believe that the spacing can be
changed. I have a set that are completly disassembled, two of the carb bodies are bad. They came off of a 89 GSXR 1100, If you need any of the parts, let me know.

Title: Re: mikuni RS carbs
Post by: redbandit12 on January 23, 2008, 02:16:44 PM

i have a set of 38's on my 900 ninja i was thinking of trying i know they are sloted and i have heard it can be done but i don't know anyone who has really ever done it

Title: Re: mikuni RS carbs
Post by: gsxr400 racer on January 23, 2008, 02:56:07 PM

we talking round slides old smooth bore style
I had a set on my bandit 400 motor worked OK dont like not having a accelerator pump but spacing and moving around is easy just re sync when done

Title: Re: mikuni RS carbs
Post by: redbandit12 on January 23, 2008, 03:00:55 PM

nope flatslide carbs.  :idea:wonder if my 33 smoothbores would work?

Title: Re: mikuni RS carbs
Post by: gsxr400 racer on January 23, 2008, 03:06:27 PM

if they have spots on the throttle rod to move they should be a piece of cake my RS's had two spots on that rod then the cross bars where slotted with one fixed carb which was the one closest to where the cable went