Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: swagzz on January 24, 2008, 06:17:47 AM

Title: performance Cams
Post by: swagzz on January 24, 2008, 06:17:47 AM

Hi All
  looking for some info on aftermarket cams for an 01 B1200
I don't want a full on race grind just  a bit more duration to let it breathe better, jet kit and bolt on pipe.
                                   Thanks swagzz
                                             
   

Title: Re: performance Cams
Post by: RDUBandit on January 24, 2008, 07:23:51 AM

You'll get more replies if you post this in the tech section, rather than the marketplace.

Title: Re: performance Cams
Post by: txbanditrydr on January 24, 2008, 09:52:09 AM

Quote from: RDUBandit on January 24, 2008, 07:23:51 AM

You'll get more replies if you post this in the tech section....

.... And so it's done.

Seems like I remember reading that GSXR cams are a good swap but I'll leave the specifics to more knowledgeable people than myself.

Title: Re: performance Cams
Post by: Ranger on January 25, 2008, 01:03:24 AM

Over the counter OEM GSXR cams (86 thru 90) are a pretty much drop in.

Most people run just the intake cam along with carb and exhaust mods.

Title: Re: performance Cams
Post by: swagzz on January 25, 2008, 06:25:30 AM

Thanks , I'll check this out and throw it in the tech section too.
                                             Swagzz

Title: Re: performance Cams
Post by: Red01 on January 25, 2008, 04:29:49 PM

Quote from: Ranger on January 25, 2008, 01:03:24 AM

Over the counter OEM GSXR cams (86 thru 90) are a pretty much drop in.

Yup! 
Just be sure to used the Bandit cam sprockets!
The GSXR cam sprockets are different and not compatible with the Bandit (unless you're using a GSXR crank and cam chain, too).

Title: Re: performance Cams
Post by: Blade on January 25, 2008, 08:03:00 PM

I would highly recommend the 88-89 GSXR 750 intake cam and the 89 GSXR 750 exhaust cam. That is what I run in my Bandit and I also have access to OEM parts.

Title: Re: performance Cams
Post by: swagzz on January 26, 2008, 03:40:55 PM

Thanks Bill
      I'll start looking around and see what is available here ,where I,m working at the moment is a bit shy on performance places and bike wreckers.
                                                           swagzz

Title: Re: performance Cams
Post by: Blade on January 26, 2008, 05:04:53 PM

Here is a link on the install:

http://www.billsbikesnservice.com/cam.htm