Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: rider123 on May 12, 2012, 11:06:03 AM

Title: Quick question about needle seat on GEN2 bandit
Post by: rider123 on May 12, 2012, 11:06:03 AM

Hey guys number 4 carb is leaking fuel enough that the overflow is overflowing when driving. I'm going to take that carb apart and check the obvious stuff ie needle valve, seat, emulsion tube o-ring etc. The microfiche is kind of shit but it looks like the needle seat is press fitted, correct? So I'm assuming I can just get a dental pick or open up the top of the carb and pull or push it out correct?

Title: Re: Quick question about needle seat on GEN2 bandit
Post by: rider123 on May 12, 2012, 03:15:16 PM

Nevermind, fixed it, crud on the needle seat.  :duh: