Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: reaper on October 17, 2006, 06:54:31 PM

Title: shims
Post by: reaper on October 17, 2006, 06:54:31 PM

carb shims anyone no where i can get these in the uk please i cant find them i need 20 at least for a 1200 first gen bandit

Title: shims
Post by: Red01 on October 19, 2006, 08:33:15 AM

I thought only the USA & Canada needed shims and the UK bikes got adjustable needles like the rest of the world.

FIVE shims per carb? What brings you to that conclusion? Most folks that shim don't need more than one or two per.

Since I've never been to the UK, I don't know where you'd go to find them, but you can try taking a needle and a slide down to a store that sells electronic parts or a place that deals with RC planes/cars/etc and find a suitable washer with an ID that fits around the needle and an OD that does not hang up on the wall of the slide when you put the needle back in.

Title: shims
Post by: reaper on October 19, 2006, 12:48:48 PM

lol its not 5 shims per carb i need to do a couple of bikes so i need enough for that and any other that i might do

Title: shims
Post by: RUSS M8 on October 22, 2006, 05:37:17 AM

Yeah, I would try an electronics or hobby shop.