« previous next »
Pages: [1]

Author Topic: valve adjust link not working in FAQ  (Read 2503 times)

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
valve adjust link not working in FAQ
« on: August 22, 2008, 08:40:00 AM »
thought i'd read up on the valve adjust as no matter whats wrong with the bike I'll probably do one of those now. Yet the link in the FAQ is broken...anyone have one that works?
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: valve adjust link not working in FAQ
« Reply #1 on: August 22, 2008, 12:28:06 PM »
Try this link:

http://www.billsbikesnservice.com/cam.htm

You'll have to separate the cam install parts from the valve adjusting parts though.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: valve adjust link not working in FAQ
« Reply #2 on: August 28, 2008, 04:28:53 PM »
 :banghead: this link worked just a few days ago...now is dead again.
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline smooth operator

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1035
Re: valve adjust link not working in FAQ
« Reply #3 on: August 29, 2008, 05:28:40 AM »
  If no one comes up with a link, I can give you the sequence order and any other info you need. I just have to go over my notes in my Haynes manual. (don't forget to pay attension to the 2 locating pins when taking off the cover.You don't want any falling into the bottom end.)  Dan
Logged
Pages: [1]
« previous next »