Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 600 thru 1200 - AIR/OIL COOLED TECHNICAL => Topic started by: mademiriam on August 22, 2008, 08:40:00 AM

Title: valve adjust link not working in FAQ
Post by: mademiriam on August 22, 2008, 08:40:00 AM

thought i'd read up on the valve adjust as no matter whats wrong with the bike I'll probably do one of those now. Yet the link in the FAQ is broken...anyone have one that works?

Title: Re: valve adjust link not working in FAQ
Post by: Red01 on August 22, 2008, 12:28:06 PM

Try this link:

http://www.billsbikesnservice.com/cam.htm

You'll have to separate the cam install parts from the valve adjusting parts though.

Title: Re: valve adjust link not working in FAQ
Post by: mademiriam on August 28, 2008, 04:28:53 PM

 :banghead: this link worked just a few days ago...now is dead again.

Title: Re: valve adjust link not working in FAQ
Post by: smooth operator on August 29, 2008, 05:28:40 AM

  If no one comes up with a link, I can give you the sequence order and any other info you need. I just have to go over my notes in my Haynes manual. (don't forget to pay attension to the 2 locating pins when taking off the cover.You don't want any falling into the bottom end.)  Dan