Author Topic: 1250 Mod parts  (Read 5932 times)

Offline banditgarry08

  • New user!
  • *
  • Posts: 4
  • banditgarry08
1250 Mod parts
« on: April 11, 2010, 12:08:53 PM »
Have a 08 1250 Bandit.
I was ondering what aftermarket wind screen to get, stock one seems too small for extended trips?

Garry.
« Last Edit: April 11, 2010, 12:20:27 PM by banditgarry08 »

Offline bottomfeeder

  • Board Regular!
  • **
  • Posts: 16
Re: 1250 Mod parts
« Reply #1 on: April 11, 2010, 02:21:53 PM »
Actually it will depend on your size @ least for me I went with the givi and then now using the zero gravity touring wind shield.  I am 5'10' and works ok but would like it about 2" taller.   
If you dont have any issues with your wind screen now you may not need to change its just the wind really created a lot of buffeting for me.
I read where some like the vario or lamar lip for better wind protection ... Good luck in your search

Offline banditgarry08

  • New user!
  • *
  • Posts: 4
  • banditgarry08
Re: 1250 Mod parts
« Reply #2 on: April 11, 2010, 03:18:06 PM »
 :thanks:

Garry

Offline gyrogearcrunch

  • Board Homesteader!
  • ***
  • Posts: 211
Re: 1250 Mod parts
« Reply #3 on: April 12, 2010, 10:32:33 AM »
Have a 08 1250 Bandit.
I was ondering what aftermarket wind screen to get, stock one seems too small for extended trips?

Garry.

I have the same problem with my 1255. I fixed it on my '99 1200S by ditching the "S" fairing and its "potato chip" windscreen and installing a round Headlight from an old Suzuki and a really big Plexifairing windshield (J.C. Whitney still carries something a lot like it).

After a preliminary look, I can't see how to easily remove the fairing on the 1255 without losing the instruments too. If anyone has done a conversion like this on the 1255, please let me know what problems you ran into, if any.

Thanks!

Herb

Offline guffter6969

  • New user!
  • *
  • Posts: 5
Re: 1250 Mod parts
« Reply #4 on: April 12, 2010, 11:12:05 AM »
I've tried both a screen the same size as the standard one with a bit of a flip and an mra screen with the adjustable spoiler, although it's pricey, the mra one is defo the way to go. Hope this helps.

Offline realbinky

  • First Post! Be Gentle!
  • *
  • Posts: 1
Re: 1250 Mod parts
« Reply #5 on: June 10, 2010, 01:33:02 PM »
Check out Robo Bracket's system.  It is adjustable in height and angle to get "just right"