Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 650 and 1250 - WATER COOLED TECHNICAL => Topic started by: Heyu on April 02, 2008, 01:11:39 PM

Title: Bandit wheels
Post by: Heyu on April 02, 2008, 01:11:39 PM

Does anyone know if the 1250 is using the same wheels as the 05 1200 I am looking at doing some gearing changes but am having difficulty finding sprockets for the 1250. If anyone knows of a place that has sprockets I'd appreciate a link.

Title: Re: Bandit wheels
Post by: Red01 on April 03, 2008, 12:27:27 AM

Pretty sure the wheels are different on the 1250... but that doesn't mean anything regarding sprockets.
I don't know if the 1200 sprockets are bolt-ons for the 1250, though.  As a guess, I'd say they probably do - especially the rear one, since it's a pretty common Suzuki pattern on the 1200 (ie; shared with many other Suzuki chain drive bikes with 530 chain).

Title: Re: Bandit wheels
Post by: Heyu on April 03, 2008, 12:22:35 PM

They are not the same part # as V-Strom and GSXr's so I'm not sure it's a five bolt pattern.

Title: Re: Bandit wheels
Post by: bngboyd on April 03, 2008, 12:56:38 PM

Hope this is ok as I do not want to break any board rules......


Part number and availability can be found at Holeshot for the 17 tooth.

http://www.holeshot.com/ (http://www.holeshot.com/)


Looking at the 1200's and the 1250 part numbers, they are not the same.


Hope this helps a little.

Title: Re: Bandit wheels
Post by: Red01 on April 03, 2008, 05:35:44 PM

Yup, not the same - the 1200 has a 6-bolt pattern, the 1250 only 5.
Front sprockets wouldn't be the same p/n because the tooth count is different - even if the spline mounting is the same.

Title: Re: Bandit wheels
Post by: houndawg on May 14, 2008, 10:07:21 PM

front sprocket is same as hayabusa