Author Topic: Scorpion exhaust pics  (Read 9778 times)

Offline Blue Racer

  • Board Homesteader!
  • ***
  • Posts: 55
Re: Scorpion exhaust pics
« Reply #15 on: August 07, 2008, 07:01:53 PM »
Ray, neat looking can.  I had a Yoshi on my '98 Bandit, rejeted and K&N air filter.  Ran very well, but not as well as my '07.  You said you blocked off the PAIR hose....what is that please and how do you do it?  Thanks.
If you have not been to Luckenbach, your journey is not complete.

Offline A1A

  • TURBO TYPER!
  • **
  • Posts: 44
Re: Scorpion exhaust pics
« Reply #16 on: September 12, 2008, 03:07:38 PM »
I didn't change anything except blocking off the PAIR hose. It pops quite a bit on deceleration if you don't do this, but it still runs just fine. My gas mileage has dropped a little, but I'm pretty sure that's my fault for playing with the loud handle so much.  :grin:

It looks like the angle of the can is the same as stock, and the Scorpion is much shorter, so it might clear, but I'm not sure. I know Dale makes a sport touring can that rides lower for folks with hard bags. I know several others here have the Scorpion slip-on, so maybe they can offer some better advice regarding clearance.

Good luck.

Ray,

What is the size and what did you use to block the Pair air supply?

Thanks!
Richard
07 Red Bandit 1250S
05 Blue DL650
04 Yellow SV650N
00 Copper/Black VS1400 Intruder
58 HD Sportster H

Offline Ray Mooney

  • Watch their mirrors!
  • Board Homesteader!
  • ***
  • Posts: 92
  • A man's got to know his limitations.
Re: Scorpion exhaust pics
« Reply #17 on: September 12, 2008, 06:21:16 PM »
I had some pipe insulation foam left over from a surfboard rack I made. I cut about a 1-inch by 1/2-inch section, rolled it like a foam ear plug and shoved it into the hose. Worked like a charm. The foam is very dense, so I have no fear of it breaking down and crumbling inside the hose. As others have said here, almost anything that will fit will work, but I liked the idea of using something that I could compact and then would expand to fill the space.
Ray Mooney
'07 Bandit 1250S

Previous bikes: '03 Vmax, '01 Bandit 1200, '99 Bandit 1200, '97 Vmax, '82 Yamaha Seca 650


Offline A1A

  • TURBO TYPER!
  • **
  • Posts: 44
Re: Scorpion exhaust pics
« Reply #18 on: September 13, 2008, 09:06:08 PM »

 :thanks: RAY!

 :motorsmile:
Richard
07 Red Bandit 1250S
05 Blue DL650
04 Yellow SV650N
00 Copper/Black VS1400 Intruder
58 HD Sportster H

Offline Bandit1250

  • Board Homesteader!
  • ***
  • Posts: 179
Re: Scorpion exhaust pics
« Reply #19 on: October 12, 2008, 04:59:01 AM »
The SCORPION cans also come with a LIFETIME warrantee and NEVER need repacking due to the SS mesh packing inside the can......SCORPION will also sell you a replacement can at 50% off retail if you ever trash it in a get off!! Great company!
I have the round one from Pipecity.

Nice Ray!  :beers:
Past Pleasures....all memories
2006 Triumph Sprint ST1050
2004 Kawasaki ZRX1200R
2002 Kawasaki ZRX1200R
1984 Honda V651100 Sabre
1986 Kawaski Vulcan 750N
1982 Suzuki GS750EZ
1974 Suzuki GT380 2 stroke street

Offline A1A

  • TURBO TYPER!
  • **
  • Posts: 44
Re: Scorpion exhaust pics
« Reply #20 on: October 12, 2008, 10:25:52 AM »
The SCORPION cans also come with a LIFETIME warrantee and NEVER need repacking due to the SS mesh packing inside the can......SCORPION will also sell you a replacement can at 50% off retail if you ever trash it in a get off!! Great company!
I have the round one from Pipecity.

Nice Ray!  :beers:

Scorpion stainless steel round here as well from PipeCity.

Great Product! :thumb:
Richard
07 Red Bandit 1250S
05 Blue DL650
04 Yellow SV650N
00 Copper/Black VS1400 Intruder
58 HD Sportster H