Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 650 and 1250 - WATER COOLED TECHNICAL => Topic started by: plhcpat on November 25, 2009, 06:02:02 PM
-
Hi all,
I'm looking for some direction on this one. Here is a picture of the "intake" on the right side of an '07 1250. Fuel leaks out of this area and drips to the other photo... Nothing in the area to tighten up... Any clues??
Thanks,
Pat
-
Cut or grind the spacers down in between the clamps so they
will tighten more....several bikes have had this issue :beers:
-
I had the same problem; ended up completely removing the little spacers.
That was over 5K miles ago; no problems at all and no more leak.