Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 650 and 1250 - WATER COOLED TECHNICAL => Topic started by: ippo on November 26, 2007, 02:19:33 PM
-
(http://lh4.google.fi/ippokoo/Rt1f4U0ZZkI/AAAAAAAAAms/4_UXZTTmncQ/IMG_0314.jpg)
I have made the cover of radiator by lazer. Torque 115Nm 112 Hp (rear wheel)
-
It looks nice, but it looks like it blocks off a lot of air. Maybe it's not a problem in Finland, but for people who live in hotter places, it might not be a good thing.
-
OK I give up, where is the photo of this radiator cover that Red01 can see with his x-ray vision.
-
http://lh4.google.fi/ippokoo/Rt1fOU0ZZjI/AAAAAAAAAmM/FjOq0SPlntA/IMG_0284.jpg?imgmax=912
Jeez :roll:
-
I see Ranger can see it with his cool specs. :lol:
-
I can't see the inline pic or the link.... :duh:
-
Honestly even the link Ranger posted is unaccessible. But like crashing a party I'll just pretend that I see it to. Oh yeah Ippo, that is some pretty good work, no laser burns or nothing. But like Red01 suggested you may want to fire just a few more holes in the center. :thumb:
-
Well, ippo has removed the pic and the link Ranger posted isn't working for me now either. :shrug:
-
(http://lh6.google.fi/ippokoo/Ru6ylYI31pE/AAAAAAAAArw/ixKydw17Wdg/s160-c/SLeikk.jpg)
The cover of the ra.....by ippo
-
try again ippo we still can't see
-
It looks nice, but it looks like it blocks off a lot of air. Maybe it's not a problem in Finland, but for people who live in hotter places, it might not be a good thing.
I have tested the cover +30C temperatures and in the city---No problems.
There is one inch slit between the cover and radiator.
The holes make more effective point of the compass.
I can`t explain this in english.
-
try again ippo we still can't see
I don't understand why you can not see images.I tested both linux and win-xp ---works.
Do you have Mac os 10?
-
It's OK, don't worry, just use any English that works. But still no see photo!
I can`t explain this in english.
-
nicely done ippo you say there is 1" of clearance between the gaurd and the rad? that should be fine their seem's to be a high air flow area where you spelled out bandit. like I said nicely done. Have you considered a fork brace it'll tighten up the front end of the bike you'll like it.
-
Hey ippo were those pictures taken at a bandit rally(ride) in Finland? If they were it's cool to see what bandit riders over there are doing to their bikes Kinda gives us a different perspective on what can be done.
So maybe you could be our Finnish Ambassador??
Red the large cutouts on the top and bottom of the cover should allow enough air flow to keep it cool JMO
even in the hottest areas.
-
Hey ippo were those pictures taken at a bandit rally(ride) in Finland? If they were it's cool to see what bandit riders over there are doing to their bikes Kinda gives us a different perspective on what can be done.
So maybe you could be our Finnish Ambassador??
Red the large cutouts on the top and bottom of the cover should allow enough air flow to keep it cool JMO
even in the hottest areas.
http://www.suzukibandit.org/index.php?topic=22.0
There are pictures the bikes of finish member.Rally was near by my home area,you are all wellcome next summer.
The lamps you can leave home. It is sunny 24 hour/day and night.
-
Hmmm, unusual, I am behind one of the tightest gateways in the world and I generally cannot see pictures but I see this one just fine.
Nice job, but agree that I might worry a bit about air flow.
-
Hmmm, unusual, I am behind one of the tightest gateways in the world and I generally cannot see pictures but I see this one just fine.
Nice job, but agree that I might worry a bit about air flow.
It is amazing,but air flow is better than original one.I have ridden 7500km-no proplem.
-
Nice job :clap:looks good.