Author Topic: Handguards and Indywinks  (Read 13037 times)

Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Handguards and Indywinks
« on: May 23, 2009, 01:17:29 PM »
I've fitted them to the beast, results below.........


Offline Sven

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1918
  • Drop the puck!
    • My site is always under renovation!
Re: Handguards and Indywinks
« Reply #1 on: May 24, 2009, 10:12:12 AM »
What handguards are those?
2003 Suzuki Bandit 1200S | el Bandido de Cerceta | the teal bandit
2010 Yamaha FJR1300A | Gin Tama | the silver bullet
2002 Honda CRV | the dirt-colored car

Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Re: Handguards and Indywinks
« Reply #2 on: May 25, 2009, 07:40:55 PM »
Hi Sven, they are the Suzuki V-Strom DL 650, slighy alteration needed for the left hand side (clutch) but very easy to fit and dont look to bad either.

Offline Sven

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1918
  • Drop the puck!
    • My site is always under renovation!
Re: Handguards and Indywinks
« Reply #3 on: May 25, 2009, 08:01:05 PM »
Heck, they look great!
2003 Suzuki Bandit 1200S | el Bandido de Cerceta | the teal bandit
2010 Yamaha FJR1300A | Gin Tama | the silver bullet
2002 Honda CRV | the dirt-colored car

Offline icemakk

  • Board Homesteader!
  • ***
  • Posts: 140
    • My web site
Re: Handguards and Indywinks
« Reply #4 on: May 26, 2009, 03:21:19 PM »
I've fitted them to the beast, results below.........


Got any pics other than head on?
Was thinking of doing this myself.
Once I thought I was wrong...but I was mistaken.


Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Re: Handguards and Indywinks
« Reply #5 on: May 26, 2009, 05:50:13 PM »
Sorry Ice just seen your reply will take some pics in the morning for you, its 22.00hrs here and just a tad to dark....

Offline icemakk

  • Board Homesteader!
  • ***
  • Posts: 140
    • My web site
Re: Handguards and Indywinks
« Reply #6 on: May 26, 2009, 05:52:48 PM »
Sorry Ice just seen your reply will take some pics in the morning for you, its 22.00hrs here and just a tad to dark....
Thanks, I appreciate that. Nice color bike you have there if I do say so myself
 :beers:
Once I thought I was wrong...but I was mistaken.


Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Re: Handguards and Indywinks
« Reply #7 on: May 27, 2009, 09:22:04 AM »
Hi Ice took a couple of snaps for you, if there is anything specific you want just ask.....









and this arrived in the post this morning, but I can only fit tomorrow....




Offline icemakk

  • Board Homesteader!
  • ***
  • Posts: 140
    • My web site
Re: Handguards and Indywinks
« Reply #8 on: May 27, 2009, 11:11:21 AM »
Hi Ice took a couple of snaps for you, if there is anything specific you want just ask.....
Okay....can I have your handguards then?
 :motorsmile:
Thanks for the pics, looks great.
You said a slight mod was needed to fit them on the clutch side. What exactly did you do?


Once I thought I was wrong...but I was mistaken.


Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Re: Handguards and Indywinks
« Reply #9 on: May 27, 2009, 02:10:21 PM »
On the clutch side the handguard is a bit longer which hits the fairing, what I did was to cut it off and then "stuck" a piece shaped from what I cut off over the remaining handguard, but the plastic does not take to adhesives very well so at the moment it has Araldite contact adhesive and black gaffer tape holding it in place.

On the original picture from the front you can just see silver gaffer tape (changed now), I believe there is an glue which you apply and then spray on an activator to set it, when I find I will let you know.

Offline guffter6969

  • New user!
  • *
  • Posts: 5
Re: Handguards and Indywinks
« Reply #10 on: August 18, 2009, 03:47:07 PM »
when you got the handguards did you also get the spacers for between the bar end and the bars? if you had to buy them seperatley, did they require longer studs and how much were they in total.
Ta

Offline ba55man

  • Board Regular!
  • **
  • Posts: 15
Re: Handguards and Indywinks
« Reply #11 on: August 23, 2009, 09:08:57 AM »
Hi guffter, you get everything with the kit thats needed longer screws and the like and you use the original bar end weights.