Author Topic: 2005 GSXR Front Fairing on a '97 1200 Bandit (Read 16936 times)

jwalters · « **Reply #15 on:** April 12, 2006, 01:02:42 PM »

Honestly, if I just had a bit more room for a TV, stereo and a beer fridge, I'd be set....

Quote from: "Red01"

Quote from: "jwalters"
By the way, here is a picture of my "Shop" I work in. Pretty nice, eh? Lots of room to work.

When I had a 1-car garage, it used to look like that, so my next place had a 2-car garage. Didn't take long for it to look like that either. Next place had a 2-car garage with the back wall kicked out and extended to make it two cars deep on one half and ~1/2 car's worth of workbench space (so it was a 3.5 car garage, but looked like a 2-car from the street). Before you know it, cluttered. Now I have a 30x36 shop with a 12x30 second floor storage. Yup, you guessed it, you can barely walk thru the place.

I need to go on a cylinder reduction plan... but I don't want to.

Red01 · « **Reply #16 on:** April 12, 2006, 01:25:45 PM »

I don't have a TV out there... but then I'm happy with the stereo.

jwalters · « **Reply #17 on:** April 12, 2006, 01:27:01 PM »

I have to be able to watch MotoGP on sundays while work'in in the shop!

Quote from: "Red01"

I don't have a TV out there... but then I'm happy with the stereo.

Red01 · « **Reply #18 on:** April 12, 2006, 01:29:18 PM »

I just go in the house and watch them on the big screen. The DVR will let me watch them whenever I want, so if it's a nice Sunday, I can go riding and watch 'em when I get home.

jwalters · « **Reply #19 on:** April 12, 2006, 01:33:21 PM »

Damn! I have no big screen or DVR either... I feel shame.

Honestly, if i miss the race its no problem. The motogp.com site (if you subscribe) has awesome full race videos. They have the one you see on speedtv, but this year, I noticed they have really nice full length bike camera views on many of the race bikes. I like those because they turn them on well before the race, so you get a "behind the scenes" look at the race.

Quote from: "Red01"

I just go in the house and watch them on the big screen. The DVR will let me watch them whenever I want, so if it's a nice Sunday, I can go riding and watch 'em when I get home.

Doch80 · « **Reply #20 on:** April 13, 2006, 01:29:42 AM »

Dang!... a bandit, V-Max, and a BEAUTIFUL Cafe'!?! What else does your garage need?... other then a beer fridge and a TV?

jwalters · « **Reply #21 on:** May 10, 2006, 12:46:14 PM »

Here are some final shots of the ferring installed on my bandit trackbike.

Heading to Blackhawk Farms this weekend, if the weather holds out.

Jesse

jwalters · « **Reply #22 on:** June 22, 2006, 12:48:41 AM »

Been a few months but I thought I would post a trackday pic.

Since that pic, I've added steal braided brake lines. Man, those Galfers are nice!
You can read my whole report over at gixxer.com
http://www.gixxer.com/forums/showthread.php?t=98410

2005B12S · « **Reply #23 on:** June 22, 2006, 02:27:58 AM »

That's a nice setup, I like the bars and riding position. My Honda helibars are not quite that low but have to work with my factory S bodywork.

I have found that now I sit too high on the stock seat, I would be interested in your imput regarding your seat height with the clip-ons.

My seat is being cut down and recovered by Tobin Seats, and should be 2-2.5inches lower than stock when done. That should give me the "sitting in" and not "sitting on" feeling I am looking for.

Anyway, very nice job.

Ride On, Ed.

roogazza · « **Reply #24 on:** June 22, 2006, 07:39:14 PM »

I'm running 'Coerce' aftermarket Carbon which includes a cutdown seat. Good weight saving and the seat is lower by about 2 inches.
Will post photos when i can borrow my boys camera.....Gaz.

6'8" and 300 lbs !!!!!!! man you're a big dude ! thought the bandit looked looked tiny !! Gaz.

jwalters · « **Reply #25 on:** June 22, 2006, 09:31:55 PM »

Honestly, being 6'8" and 295lbs, I am probably not the best person to ask about egros. But I did cut BACK the stock seat as this gave me a farther reach from the bars. With new rear sets on the way, I don't want to sit any lower (38 inch inseam).
-j
ps. not sure why that quote feature isnt' working...

Quote from: 2005B12S

That's a nice setup, I like the bars and riding position. My Honda helibars are not quite that low but have to work with my factory S bodywork.

I have found that now I sit too high on the stock seat, I would be interested in your imput regarding your seat height with the clip-ons.

My seat is being cut down and recovered by Tobin Seats, and should be 2-2.5inches lower than stock when done. That should give me the "sitting in" and not "sitting on" feeling I am looking for.

Anyway, very nice job.

Ride On, Ed.

Red01 · « **Reply #26 on:** June 23, 2006, 01:00:48 PM »

Quote

ps. not sure why that quote feature isnt' working...

It's a known anomoly. The 'quote a post' feature has gone haywire but the plain quote feature, like I used above, works fine.

If you use the 'quote a post' feature and want it to work, you need to go in and edit it a little. The way I've been doing it is you take the first tag:

Quote from: 2005B12S

and edit it to look like this:

Quote
[ b]2005B12S: [/b]
(but without the space between [ & b)

Then it'll make a quote that looks like this:

Quote
2005B12S: Sample post

Some folks don't want to go to that much trouble and edit it to look like this instead:

Quote
="2005B12S"

That gives you a quote that looks like this:

Quote
="2005B12S"Sample post

Still lets you know who said it, but runs the userid into their statement unless you add a space between the last " and first character of their post.

jwalters · « **Reply #27 on:** June 23, 2006, 01:18:39 PM »

Thanks Paul.

But what if I want to quote a quote from your quote showing how to use a quote, while ensuring it stays bold and italic?

jwalters · « **Reply #28 on:** June 23, 2006, 01:26:44 PM »

I knew you were going to do that! Ha! Its definitely a friday here at work too!

Red01 · « **Reply #29 on:** June 23, 2006, 01:37:50 PM »

You just have to throw some spaces in there or things get all screwed up and you say screw it and delete your post.