Author Topic: 1G belly pan and rear hugger 4 sale (Read 4663 times)

justinkr58 · « **on:** March 17, 2006, 11:36:04 AM »

anyone interested in a 1G belly pan or rear hugger
they are unpainted 7 layer fiberglass.
ill send a pic if your interested

zeebandit · « **Reply #1 on:** March 17, 2006, 02:56:43 PM »

I'm interested in the belly pan My email address is dziepak@sbcglobal.net.
Also How much.

George

flip · « **Reply #2 on:** March 17, 2006, 05:02:05 PM »

Is the hugger for a 6 or a 12?

justinkr58 · « **Reply #3 on:** March 17, 2006, 07:04:56 PM »

it is for both 600 and 1200
says where i bought it and it is for 2000 year and down

justinkr58 · « **Reply #4 on:** March 20, 2006, 06:46:56 PM »

[/url]

[/url][/url]

here are some pics.
they are primed and ready to paint

the hugger will mount directly to the chain guard holes,and a small bracket will connect it to the brake side stand pivot thread
(just need a 3-4'' piece of metal with holes drilled and 2 threaded screws)
ive got more than 2

i have not fitted the belly pan yet but ill check it and post on how it mounts.
it looks like though you need to drill and mount directly to the frame? ill check very soon.

justinkr58 · « **Reply #5 on:** March 21, 2006, 11:03:27 PM »

ive checked the belly pan fitment and it looks to line up close to the frame screws that are by the manifold.
i dont know if it would be best to mount to the frame screws or drill new holes?
the hugger does not touch the frame though , it will mount to brackets that mount to the frame screws or self tapped holes.
let me know if you know different.

justinkr58 · « **Reply #6 on:** March 23, 2006, 02:33:32 PM »

Oh Ive also got one of each finished in gloss black.

texlurch · « **Reply #7 on:** June 08, 2006, 03:43:42 PM »

How much difference is there in the 2001 frame and lower engine? Would these fit an 01?

Red01 · « **Reply #8 on:** June 09, 2006, 01:00:13 PM »

AFAIK, the 600 uses a different hugger than the 1200 because the swingarm and wheel are different.

The belly pan should fit any B6 or B12 though.

texlurch · « **Reply #9 on:** June 09, 2006, 06:08:07 PM »

On the Holeshot site, there is a different p/n for the 1st and 2nd Gen 600, but all 1200 are the same.

So are these for a 600 or 1200, and how much??

texlurch · « **Reply #10 on:** June 12, 2006, 02:33:46 PM »

justinkr58

Are you interested in selling these or not?