Author Topic: high mounted mid pipe for a 01 B6 (Read 2737 times)

FreediverGa · « **on:** August 26, 2005, 04:25:08 PM »

I want use the Scorpion pipe I have now but want amid pipe that will allow my mount the highrt up if possible? Any ideas?

Red01 · « **Reply #1 on:** August 26, 2005, 09:00:58 PM »

I don't think there's anyone that sells just midpipes.

How long is your Scorp? Keep in mind most high mounted pipes use short (14" or less) cans because they have less space to work with than a standard upswept setup

You could have a local muffler shop bend you up something and then you could polish, paint or coat it however you like. If you do that, don't forget to take into account swingarm movement and the clearance it needs from the pipe when the rear wheel becomes unloaded.

Otherwise, sell your Scorp and buy someone's high pipe setup.

Not trying to rain on your parade.
Really

FreediverGa · « **Reply #2 on:** August 28, 2005, 10:22:00 AM »

thanks, I was just really interested but if someone made one, if they don't make one I'm not going really worry about it !

Arkan Eller · « **Reply #3 on:** September 27, 2005, 04:35:12 PM »

Banditmania in the UK do this http://www.banditmania.co.uk/pics310102/600_SINGLE_HI_LEVEL_SYS.JPG

Not sure if you can get it shipped to the states but might be worth a try.

Arkan Eller · « **Reply #4 on:** September 30, 2005, 09:35:37 AM »

I just found out they do ship to the states so that might be good. Might also be expensive of course.