« previous next »
Pages: [1]

Author Topic: mounting a acberis blitz fairing  (Read 2960 times)

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
mounting a acberis blitz fairing
« on: September 10, 2005, 12:21:41 AM »
what should i use to mount the fairing im trying to build a street fighter. Can i use zip ties or do i need to make a mount for it.thanks
Logged

Offline Soro

  • Board Homesteader!
  • ***
  • Posts: 55
Re: mounting a acberis blitz fairing
« Reply #1 on: September 10, 2005, 03:25:07 PM »
Quote from: "the kid"
what should i use to mount the fairing im trying to build a street fighter. Can i use zip ties or do i need to make a mount for it.thanks


You could make your own, use zip ties, or use the actual Acerbis mounting straps. You can buy the mounting straps from most online vendors (Example link). The Acerbis mounting straps are black plastic loops (basically zip ties) that connect to the back of the Acerbis fairing. I personally think they look a little cheap but that is what I'm going to use for now (until I fabricate my own "sexy" straps).
Logged
2002 1200S going to a Street Fighter!
1987 GSX-R 1100 Restoration Project
2005 Sprint ST 1050
2002 Daytona 955I (sold)

Offline tacoman

  • Board Homesteader!
  • ***
  • Posts: 793
ties
« Reply #2 on: September 12, 2005, 03:30:05 PM »
I have only used Acerbis products on my dirtbike.  Usually they have thick, black rubber band type straps with interlocking tabs.  They usually wrap around the forks.  I'm sure some hard straps could be fabbed from some aluminum.
Logged

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
werwer
« Reply #3 on: September 13, 2005, 11:31:11 PM »
yah i made some out of dorr shims they wirk really good .thanks
Logged
Pages: [1]
« previous next »