« previous next »
Pages: [1]

Author Topic: B12 fork wap  (Read 2696 times)

Offline ari211

  • TURBO TYPER!
  • **
  • Posts: 28
B12 fork wap
« on: July 18, 2006, 02:09:45 PM »
It seems BBS was down last week so I had to fly blind and bought a pair of forks off an 03 B12, hoping they'd fit my 600. Obviously they don't... My Q - is it possible to just swap the innerds from the B12 to my B6, springs, adjuster, dampening rod etc? Anyone have any experience? Rather not pull both apart just to find out it can't be done.. Thanks!!!
Logged
2001 GSF600S
Gone, but not forgotten...

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
B12 fork wap
« Reply #1 on: July 19, 2006, 02:03:15 PM »
No, it's not reasonably possible, the two have totally different innards.

You can install them on a B6 if you use B12 triples or hone your B6 ones out 2mm (best done my someone with machine shop equipment). You'll also need B12 calipers because the B6 ones won't mate to the B12 forks. Might need the B12 rotors, too... basically, this swap is best done with an entire B12 front end, not just the fork tubes.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)
Pages: [1]
« previous next »