« previous next »
Pages: [1]

Author Topic: case gaurds  (Read 5854 times)

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
case gaurds
« on: August 30, 2005, 11:51:17 PM »
im looking for a set of case gaurds for a 96 b6  ihave seen the suzuki ones on ebay and i like the style of them are there any other companys out there that make them. also is there a site were you can order the suzuki ones thanks for any help
Logged

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
case gaurds
« Reply #1 on: August 31, 2005, 12:13:44 AM »
Givi (#TN392) & Renntec (REN10084B & REN10084C) make guards for the Bandit 600. IMHO, these are better than the Suzuki ones.

Are the ebay ones new or used? I thought the Suzuki ones were only available thru Suzuki dealers. Probably the cheapest dealer source for them is Ron Ayers... or at least compare Ron's price ($94.18 for the B12 ones - which is all that's currently available, but are the same as the B6 ones except they're black instead of silver) to the ebay prices.

There's no pic on the Givi site for the B6, but they look like their B12's guards - and come black:



The Renntec guards look like the Givi guards, but come in black or chrome. (They have a B12 version, too.)

Holeshot also makes guards, but only for the B12.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline buggyho

  • TURBO TYPER!
  • **
  • Posts: 24
case gaurds
« Reply #2 on: August 31, 2005, 10:24:27 AM »
Holeshot make some as well. I don't know if they make one for the 600 but a e-mail could answer that. Personally I prefer just to use NRC case covers. I lowsided at the track on the right about 60 mph and only lost a bar end weight, Had to replace the muffler and I didn't have to replace my NRC cover but it was ground pretty good. Here's the Holeshot bars:

Logged
Good friends, good times

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
case gaurds
« Reply #3 on: August 31, 2005, 08:38:04 PM »
The 600 isn't listed on the Holeshot site as applicable to the nerf bars. There must be some difference in the frame or I'm sure Dale would have listed them as fitting.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
hyfgh
« Reply #4 on: August 31, 2005, 11:53:51 PM »
how do case gaurds compare aginst frame sliders
Logged

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
case gaurds
« Reply #5 on: September 01, 2005, 12:37:00 AM »
Might as well throw NRC covers into the mix then, too.  :wink:

All three will (or should) protect the engine in case things go horizontal.

Pete has some experience with the OEM Suzuki guards NOT doing the job though.

Personally, I don't care for the cluttered looks the case guards give. Holeshot's are the most subtle of the bunch, but not available for the B6.

I opted for the NRC covers myself.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline Runerx

  • Board Homesteader!
  • ***
  • Posts: 74
Re: hyfgh
« Reply #6 on: September 01, 2005, 12:41:49 AM »
Quote from: "the kid"
how do case gaurds compare aginst frame sliders

Check out bandit mania for Sliders/mushrooms. I have The red and carbon look(its a sticker) sliders and I love 'em (cept for the cheesy stickers) :roll:

Dj
Logged
DJ - Skin donations to the dirt/pavement gods suck!

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
r67
« Reply #7 on: September 01, 2005, 01:55:09 PM »
are the frames on the first gen b6 and b12 the same
Logged

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: r67
« Reply #8 on: September 01, 2005, 09:22:20 PM »
Quote from: "the kid"
are the frames on the first gen b6 and b12 the same


No, but they are quite similar... either engine will swap into either frame and they use the same bodywork. Gas tanks are the same except for the 600's lack of a provision for a fuel gauge sendor.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline tacoman

  • Board Homesteader!
  • ***
  • Posts: 793
case guards
« Reply #9 on: September 02, 2005, 04:00:03 PM »
I would go with an aftermarket guard.  I have the Suzuki guards, they're ok.  I got mine for $30 on ebay brand new so thats why I got them.  My biggest gripe is that they cover the ignition cover bolts so you have to remove them if you want to access the ignition.
Logged

Offline req

  • Board Regular!
  • **
  • Posts: 10
case gaurds
« Reply #10 on: September 02, 2005, 05:55:37 PM »
I got a pair of SW-MOTECH guards for my '01 B600.  You can find them from TwistedThrottle.com.  HAven't dropped it yet, so I don't know how well they work, but they look pretty nice.
Logged

Offline the kid

  • TURBO TYPER!
  • **
  • Posts: 47
yj
« Reply #11 on: September 02, 2005, 07:24:04 PM »
they wont fit on a per 00 will they
Logged
Pages: [1]
« previous next »