Author Topic: Request for speedometer info  (Read 2874 times)

Offline b1200

  • New user!
  • *
  • Posts: 9
Request for speedometer info
« on: November 21, 2005, 03:05:43 PM »
Hi, as part of a streetfighter project I would like to replace the stock speedo with a mini speedo from Drag Specialties.  They sell 2 versions,
- 2240:60 ratio
and 2:1 ratio.

Does anyone know which one would be correct for a 99 Bandit 1200?

Thanks very much
Tim :motorsmile:
Tim

Offline b1200

  • New user!
  • *
  • Posts: 9
Request for speedometer info
« Reply #1 on: November 21, 2005, 06:14:18 PM »
Also available is a 1:1 ratio speedo.

OK, let me ask another question.....

Does anyone know of an aftermarket speedo (a small one, preferably) that would work on a 1200 Bandit?

Thanks!!
Tim

Offline Cruisecontrol

  • Board Homesteader!
  • ***
  • Posts: 203
Request for speedometer info
« Reply #2 on: November 22, 2005, 02:53:43 AM »
www.banditmania.co.uk has a nice digital speedo/tach that is quite small and looks nice too. Their site is down at the moment so I can't get a picture of it.

Offline tomacGTi

  • Board Homesteader!
  • ***
  • Posts: 663
Request for speedometer info
« Reply #3 on: November 22, 2005, 10:52:18 AM »
http://www.acewell-meter.com/DEFAULT.asp

I was looking into one of these units till I figured out how to fix mine.

-Randy

Offline b1200

  • New user!
  • *
  • Posts: 9
Request for speedometer info
« Reply #4 on: November 22, 2005, 12:06:52 PM »
Thanks for the info.

FWIW, I took the advice of a friend and wrapped a little piece of tape around the end of the speedo cable, which is disconnected.  Then I put a piece of tape on the wheel.  As the wheel turns 1 revolution, the speedo cable turns 2.  I guess this is a 2:1 ratio.

Tim
Tim