Author Topic: Lowering front end  (Read 4106 times)

Offline ttewejnodnarb

  • Board Homesteader!
  • ***
  • Posts: 160
Lowering front end
« on: November 21, 2005, 06:45:53 PM »
I think I understand the basic principal that if you raise the rear of the bike you will quicken the streering.  My question is, since I am 5'6" and can't go an extra 1" - 1.5", can I raise the fork tubes and lower the front by 1"?  I wouldn't mind a quicker steering bike and would really love to get a little more of my foot on the ground.  Will this alter the steering geometery too much?

 :thanks: in advance!
Brandon
98 B12S

Offline 2005B12S

  • Board Homesteader!
  • ***
  • Posts: 314
Lowering front end
« Reply #1 on: November 21, 2005, 07:06:58 PM »
No, it makes the bike steer more like a sport bike. I lowered my '05 by 1.5 inches to mount the pictured clip-ons above the top triple. I am very happy with the results.




Raising the tubes in the triples is an old trick used to make a bike steer quicker. The Bandit is very conserative as far as rake/trail, you will have no problems.

Good Luck, Ed.
2005 GSF1200SZ
1983 GS750ED
2005 GSF1200SZ
1983 GS750ED
1992 900SS

"The quality of the kite matters little, sucess depends upon the man sitting in it" Manfred Von Richthofen

Offline ttewejnodnarb

  • Board Homesteader!
  • ***
  • Posts: 160
Lowering front end
« Reply #2 on: November 21, 2005, 07:17:07 PM »
Great!

 :thanks:

...and great looking bandit by the way :beers:
Brandon
98 B12S

Offline slo coach

  • Board Homesteader!
  • ***
  • Posts: 131
Lowering front end
« Reply #3 on: December 05, 2005, 04:55:13 PM »
anybody remember what to torque the bolts etc back up to after raising the tubes in the tripples?
     
 anything else to check on while doing it?

thanx      slo coach

Offline ttewejnodnarb

  • Board Homesteader!
  • ***
  • Posts: 160
Lowering front end
« Reply #4 on: December 05, 2005, 06:36:52 PM »
I can see if there any torque specs in the haynes manual, but not until I get home later this evening...I plan to tackle this project along with a slew of other things in the spring if I can't get any time this winter.  I still ride, mind you, but have been working extra lately.  

I rode Saturday, temp was about 30 Deg. F. Nice and balmy!
Brandon
98 B12S

Offline ttewejnodnarb

  • Board Homesteader!
  • ***
  • Posts: 160
Lowering front end
« Reply #5 on: December 05, 2005, 10:16:10 PM »
Fork top bolts......................23 Nm
Fork clamp bolt (top & bot)...23 Nm

I'll have to leave the other part of the question unanswered due to the fact that I have not performed this yet.
 :beers:
Brandon
98 B12S

Offline slo coach

  • Board Homesteader!
  • ***
  • Posts: 131
Lowering front end
« Reply #6 on: December 06, 2005, 05:18:13 AM »
well done......thanks for that.  


cheers slo coach