Author Topic: what should i do? (Read 3196 times)

karl · « **on:** November 20, 2006, 06:50:45 PM »

i'm in a bit of a predicament....

as my 750 is an import, it has clocks in kph. after removing the fly screen, i noticed the clock housings are shot, all scuved up. and none of the lights are working apart from the petrol gauge.

what should i do?

do i get the converter, try solve the bulb issue and try find some clock housing for my clocks,

or

do i just get some of them mini ones and be done with it, lol.

Kickstart · « **Reply #1 on:** November 20, 2006, 08:17:17 PM »

Hi

Personally I would replace te dodgy bulbs and maybe get the clock casings painted.

But if you have a fairly customised bike then I would think about some of the digital clocks that were being shown off at the NEC show:-

http://www.banditmania.co.uk/digital_clocks.htm

All the best

Keith

CWO4GUNNER · « **Reply #2 on:** November 21, 2006, 12:22:40 AM »

You know someone is going to make allot of money if they ever come up with a LED replacement that has analog faces with cool indigo back lighting.

SmokeyAndTheBandit · « **Reply #3 on:** November 21, 2006, 11:06:50 AM »

If I'm understanding you correctly, you are having trouble with the backlighting of your gauges? In most cases it's not the bulb with the problem, it's the wires. They tend to corrode and lose connection where they splice in on the harness. I had this same problem, I just opened up the harness where they splice in and redid the connection. Works great now!

karl · « **Reply #4 on:** December 05, 2006, 07:17:49 PM »

the wiring fine. it was the bulbs. just got some new ones to fit at the weekend.