Author Topic: float bowl screws (Read 2680 times)

FreediverGa · « **on:** October 24, 2005, 08:50:10 PM »

Hey I want to change out my soft float bowl screws with allen head screws what size did any of you guys switch out with?

Red01 · « **Reply #1 on:** October 24, 2005, 08:57:03 PM »

Sorry, I don't remember what size. Take one of the screws down to Home Depot, Lowes, or your favorite fastener source and just match them up.
(That's what I did.)

FreediverGa · « **Reply #2 on:** October 24, 2005, 09:00:50 PM »

ok thanks Red

PitterB4 · « **Reply #3 on:** October 24, 2005, 10:12:23 PM »

I don't know about other parts of the country but I have at least 5 Home Depots w/i an hour of my house - 4 between my office and my house. None of them have a fastener selection worth poo. I'd save the frustration and go to a local harware store. (sorry - I had to rant.)

Red01 · « **Reply #4 on:** October 25, 2005, 12:24:04 AM »

LOL... I did have to go to two Home Depots to get enough screws. One store had enough for 3 carbs and I cleaned out the other stores supply just getting #4.
Both were on my commute, but that's almost 50 miles one way.
There is a fastener specialty store just down the street from the Home Despot closest to work, but their prices were quite a bit higher.

FreediverGa · « **Reply #5 on:** October 25, 2005, 06:14:43 PM »

when I order my jet kit could I ask dale to include some for extra charge?

Red01 · « **Reply #6 on:** October 25, 2005, 10:29:15 PM »

I thought Dales kits came with allen screws now... at least the B12 kits now do.

FreediverGa · « **Reply #7 on:** October 25, 2005, 10:34:28 PM »

b12 do but the b6 kits do not!