Author Topic: Starting issues 2000 600s  (Read 3888 times)

Offline mailman44

  • New user!
  • *
  • Posts: 5
Starting issues 2000 600s
« on: June 29, 2012, 03:09:20 PM »
I have a 2000 600s (23000 miles). I am having issues with it starting up each time I try to fire it. Sometimes it fires right up with no problem. Other times the bike makes a grinding or screeching noise and does not start. I had the battery volt and load tested. It came back fine. I have ridden for 5 minutes, turned it off and immediately tried to restart it with only the screeching sound ( no clicking btw). I have left it, came back later and it fires right up. It will start with a push start and also a jump with no issues. Any help?

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Starting issues 2000 600s
« Reply #1 on: June 29, 2012, 03:27:13 PM »
Sure sounds starter related.  I'm not much help here but do recall other posts about a starter gear needing replacement from time to time.

BTW....   :welcome: to the site - glad you found us.
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline mailman44

  • New user!
  • *
  • Posts: 5
Re: Starting issues 2000 600s
« Reply #2 on: June 29, 2012, 09:36:42 PM »
To add to this, I notice the warmer the bike the less likely I will be able to get it started but once it sits and cools it starts right up. 

Offline mailman44

  • New user!
  • *
  • Posts: 5
Re: Starting issues 2000 600s
« Reply #3 on: June 30, 2012, 01:02:17 PM »
I have reAd through other threads and am leaning towards it being my starter clutch gear. Does anyone have a good place to buy parts? Also how difficult is it to replace? I am honestly a noob but am mechanically inclined... Lol. In other words I know I could figure it out with a little guidance.

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Starting issues 2000 600s
« Reply #4 on: June 30, 2012, 08:35:55 PM »
Ron Ayers and Crotchrocket websites have decent prices and an online microfiche for part identification.  I take those internet prices to my dealer and he often meets/beats those prices.  YMMV....
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: Starting issues 2000 600s
« Reply #5 on: July 07, 2012, 01:27:34 PM »
It's a pretty simple job, just d/l the service manual if you don't have one already.
Another thing -  you may not need any parts at all.  The bolt that holds it on is known to back off sometimes.  Especially if the factory or last installer forgot to use Loc-tite... so be sure to torque it per the book and use Loc-tite.

 :bandit:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline mailman44

  • New user!
  • *
  • Posts: 5
Re: Starting issues 2000 600s
« Reply #6 on: July 11, 2012, 12:13:25 AM »
Well I bought and installed a new starter and have the same issue. It actually fired up better but I still had to bump start it to get it going. Once there was gas running through it, it started with less grinding/screeching. Now what?

Offline pmackie

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1149
Re: Starting issues 2000 600s
« Reply #7 on: July 13, 2012, 07:20:35 PM »
If it wasn't the starter "screaching" then maybe you need a better/different description of the issue.

Have someone else who rides a bike try it, and see what they think?
Paul
2002-GSF600S, Progressive Fork Springs, B12 Shock,
SS Brake lines, EBC HH pads, Leo Vince Ex & Kappa bags.
Ex Bike Mechanic (late 70's), somewhat rusty
32 years in the Fuel/lubes industry(Retired)