Author Topic: adjusting vavles (Read 2946 times)

the kid · « **on:** September 01, 2005, 11:49:01 PM »

how hard is it to do a adjustment. thanks

Red01 · « **Reply #1 on:** September 02, 2005, 12:43:44 AM »

The hardest part is getting the valve cover off. If you can handle that, you're golden.

txbanditrydr · « **Reply #2 on:** September 02, 2005, 10:51:31 AM »

Quote from: "Red01"

The hardest part is getting the valve cover off. If you can handle that, you're golden.

The hardest part is getting the valve cover back on. If your handle that, your golden.

land_shark · « **Reply #3 on:** September 02, 2005, 01:03:15 PM »

Quote from: "txbanditrydr"

Quote from: "Red01"
The hardest part is getting the valve cover off. If you can handle that, you're golden.

The hardest part is getting the valve cover back on. If your handle that, your golden.

The hardest part is figuring out what the hell to do when you crack your cam cap!

Seriously, it's not difficult. Just be consious of things falling into your engine, and follow the torque settings when buttoning back up. This site has all kinds of good info to read before you dive in. Don't be discouraged, and good luck.

tbot · « **Reply #4 on:** September 03, 2005, 08:31:41 PM »

The last adjustment I made was a piece of cake, it was all the other stuff that went wrong. See me my post "valve adjust gone bad."