Author Topic: Changed grips; can't get bar end back on ('97 1200) (Read 3379 times)

curiousmike · « **on:** March 25, 2006, 04:51:34 PM »

It appears inside the bar, there is a nut that has fallen over.
This has happened on both sides of the bars... i was able to fish the nut upright, but as soon as i put the allen into it, the nut just falls over.

Am I missing something?

curiousmike · « **Reply #1 on:** March 25, 2006, 05:59:29 PM »

There was a rubber grommet inside the bar - i pulled that out, and out came the nut.

Apparently, these are aftermarket bar ends that use the "pinch" formula to achieve their insertion. (ok, that was a bit pornographic.)

Anyhow, they're in, but they really don't seem secure.

Do the stock bandit bar ends use this "pinch the grommet" method?

Daytona · « **Reply #2 on:** March 25, 2006, 06:31:05 PM »

Quote from: "curiousmike"

There was a rubber grommet inside the bar - i pulled that out, and out came the nut.

Apparently, these are aftermarket bar ends that use the "pinch" formula to achieve their insertion. (ok, that was a bit pornographic.)

Anyhow, they're in, but they really don't seem secure.

Do the stock bandit bar ends use this "pinch the grommet" method?

Yep the stock ones or all I know of use the same system! Some of the older bikes had a metal wedge that worked like the stuff on bicycle seats or handle bar attaching it inside a pipe! A bit of glue will hold the nut in place. They don't need to be super ridged.

Red01 · « **Reply #3 on:** March 25, 2006, 09:43:24 PM »

The key to removing bar ends is to not remove the bolt, just loosen it and pul the ends out with their expanding retetaier apparatus still attached... then you won't have to go fishing in the handlebar.

It's a mistake most of us make once - and hopefully learn from it.

curiousmike · « **Reply #4 on:** March 25, 2006, 10:00:02 PM »

I can't seem to get the damned thing to stay in with authority.
Is it possible the rubber grommet thing has a certain lifespan?

Daytona · « **Reply #5 on:** March 25, 2006, 10:05:39 PM »

Quote from: "curiousmike"

I can't seem to get the damned thing to stay in with authority.
Is it possible the rubber grommet thing has a certain lifespan?

Does it come with its own sys, or are you using the oem? Most have the new sys like this!
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4623600044&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

Daytona · « **Reply #6 on:** March 25, 2006, 10:11:27 PM »

Clean the rubber and the inside of your bar tubes with rubbing alcohol (not to be consumed) let dry and it should grip ok, you may have it oily!

PitterB4 · « **Reply #7 on:** March 25, 2006, 11:27:45 PM »

Quote from: "Daytona"

Clean the rubber and the inside of your bar tubes with rubbing alcohol (not to be consumed)

It's not half bad with cranberry juice!

curiousmike · « **Reply #8 on:** March 26, 2006, 01:05:47 AM »

I'll have to clean the inside and see if it helps.
thx

Daytona · « **Reply #9 on:** March 26, 2006, 11:25:23 AM »

Quote from: "PitterB4"

Quote from: "Daytona"
Clean the rubber and the inside of your bar tubes with rubbing alcohol (not to be consumed)

It's not half bad with cranberry juice!

Hey PitterB4 I see you have a month on me, here @ the best bike site on the web!!! But wow what a diff the snow makes when it comes to #'s of posts "A"

Red01 · « **Reply #10 on:** March 26, 2006, 12:56:46 PM »

He's got more than that on you... he's been around thru a board crash and a site move that both reset join dates and post counts.

He's still got some catching up to do to catch up to me though...

Daytona · « **Reply #11 on:** March 26, 2006, 02:41:52 PM »

Quote from: "Red01"

He's got more than that on you... he's been around thru a board crash and a site move that both reset join dates and post counts.
He's still got some catching up to do to catch up to me though...

You both are held in the highest regard! I concede and acknowledge your GRAND POOBA's, MASTER WIZARD's BIG BANDIT KAHUNA's Status!!!

PitterB4 · « **Reply #12 on:** March 26, 2006, 02:57:51 PM »

I just post a lot - I don't impart a great deal of wisdom (see cranberry juice comment above). BTW - this iteration of the board started in March 05.

Daytona · « **Reply #13 on:** March 26, 2006, 10:35:06 PM »

1 Red01 Camano Island, WA, USA 03 Mar 2005 3962
2 PeteSC SC, USA 01 Jan 1970 2542
3 PitterB4 Oxford, PA 03 Mar 2005 1898
4 gsxr400 racer canton,ohio 02 Mar 2005 1031
5 aussiebandit NSW Australia 03 Mar 2005 1028
6 Desolation Angel McKinney, TX U.S.A. 19 May 2005 734
7 tacoman Tacoma, Wa. 04 Mar 2005 548
8 B12Teuton Hotlanta, GA 04 Mar 2005 536
9 B6mick Aust 03 Mar 2005 516
10 Maniac Holly Hill, FL 09 Mar 2005 478
11 mike SC, USA 11 Mar 2005 461
12 scooter trash Virginia Beach, VA 14 Mar 2005 392
13 billster Oyster Bay, New York 10 Aug 2005 381
14 txbanditrydr Tyler, Texas 03 Mar 2005 371
15 Sven Germantown TN 01 Aug 2005 370
16 interfuse Toronto, Ontario 03 Mar 2005 365
17 rider123 Toronto 05 Oct 2005 338
18 billy-ninja Leics. UK 21 Jul 2005 292
19 Jacknife Newcastle upon Tyne, UK 04 Mar 2005 272
20 solman Korea 03 Jul 2005 270
21 smooth operator Erie,Pa. 23 Mar 2005 262
22 Daytona Port Orange FL Just S of Daytona 13 Apr 2005 262
I'm now 21st though was just wondering where PeteSC was? i c Squidler!

Red01 · « **Reply #14 on:** March 27, 2006, 12:49:32 PM »

Pete's got a new job that's been keeping him real busy.