Author Topic: Gettin Loose  (Read 3170 times)

Offline Rocketjock

  • Board Homesteader!
  • ***
  • Posts: 293
Gettin Loose
« on: October 05, 2006, 09:55:02 PM »
My new 06 B12 was smooth and tight for the first 2000k but now hitting 5000 I've noticed a clunk starting out in first. The chain is adjusted properly but when I put it up on the center stand and lock it in first gear I notice what I think is a big bit of play between gears. An inch or two of travel at the rear wheel. And when I do it, it clunks. Is this normal?
06 B12
Lovin my Bandit
07 KLR.
Too much fun!

Offline banditoverde

  • Board Homesteader!
  • ***
  • Posts: 76
Gettin Loose
« Reply #1 on: October 06, 2006, 02:13:42 AM »
My Bandit clunks into first. I thought they all did.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Gettin Loose
« Reply #2 on: October 06, 2006, 04:35:31 AM »
Sounds like every bike I've ever owned, so it's either normal, or every bike I've ever owned had a problem. I'm voting for normal.  :motorsmile:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline amboman

  • Board Homesteader!
  • ***
  • Posts: 137
Gettin Loose
« Reply #3 on: October 06, 2006, 07:31:39 AM »
Someone please feel free to correct me me if I am wrong, but I beleive that if you have the bike up on the center stand the chain will appear to be a little slacker as the weight will be off the swing arm.

My 05 used to "clunk" when it was telling me to adjust the chain!!!

Hope this helps.
Taken over by the dark side. Now riding a CB 1300 but visit my old bandit regular.

Offline Landry

  • Board Homesteader!
  • ***
  • Posts: 277
Gettin Loose
« Reply #4 on: October 06, 2006, 10:16:49 AM »
My experience:

-Clunk is normal, especially going from neutral to first
-Chain tension should be set with the bike on the sidestand . . . it is looser on the centerstand.
-Never really associated excessive clunk with chain tension, I always thought it got worse with oil life.

I don't know everything, though, so clunk could be realted to chain tension as well.  :grin:
Ever noticed that they don't make helmets out of bone? There's a reason.

Offline dsartwell1

  • Board Homesteader!
  • ***
  • Posts: 206
Gettin Loose
« Reply #5 on: October 06, 2006, 07:00:31 PM »
Not trying to start a war, but synthetic oil will help the clunkiness if you're not already using it. Mobil 1 15-50 is pretty popular and what I use.

Offline Rocketjock

  • Board Homesteader!
  • ***
  • Posts: 293
Gettin Loose
« Reply #6 on: October 06, 2006, 07:20:45 PM »
Thanks for the assurance, guys. But I still wonder why there is any play in the gearbox at all. And, as I said before. The chain is adjust to the min. specs.
06 B12
Lovin my Bandit
07 KLR.
Too much fun!

Offline 00to60

  • Board Homesteader!
  • ***
  • Posts: 66
Gettin Loose
« Reply #7 on: October 06, 2006, 09:46:08 PM »
The 1st gear clunk is normal for the Bandits.
 :motorsmile:
The only thing that matters is how fast you can get from 0 to 60, because top speed is secondary