Author Topic: A couple of small easy questions (Read 2216 times)

Forde · « **on:** July 23, 2007, 04:59:30 PM »

Hey,

I have two questions.

1.) What size of allen bit/wrench do i need to take my front wheel off (single disc model), i need to go buy one tomorrow.

2.) Whilst i have my forks apart i hear i should measure my fork springs to see if they are within spec. But what size should they be within to be within spec?

Thanks guys!

GooseMan · « **Reply #1 on:** July 23, 2007, 05:06:45 PM »

I know the answer to #1 since I had to find something! You'll need a 12mm Allen key for the front wheel. A little hard to find, as everywhere has up tp 10mm. So be prepared!

PitterB4 · « **Reply #2 on:** July 23, 2007, 09:54:56 PM »

For #2 get/download a service manual.

Good luck!

Forde · « **Reply #3 on:** July 24, 2007, 02:42:03 PM »

thanks gooseman i got that sorted.

pitter i already have the service manual but i couldnt find that information, ill look again. im gonna get progressive fork springs soon anyway so it doesnt even matter what shape my current ones are in lol.

Forde · « **Reply #4 on:** July 24, 2007, 02:42:37 PM »

thanks gooseman i got that sorted.

pitter i already have the service manual but i couldnt find that information, ill look again. im gonna get progressive fork springs soon anyway so it doesnt even matter what shape my current ones are in lol. i have two sets of standard ones anyway so i guess ill just use the best looking ones lol

thanks for the replies guys!!

gsxr400 racer · « **Reply #5 on:** July 24, 2007, 09:46:42 PM »

why progressive and not race tech