Author Topic: Exhausts for the 400 (Read 6074 times)

PeteSC · « **on:** March 10, 2005, 12:50:09 AM »

I think this is ground we covered before, but somebody on my DR650 board posted a link to Laser in the Netherlands for another pipe, and I checked and they have 2 full races systems for the 400 Bandit, and 2 distributors in the US.

http://www.laser-jama.nl/uk/Main.html

MArving in Italy has several slipons, with a Canadian distributor

http://www.marving.com

And Sebring has some cans it looks like they're closing out...

http://www.sebring.at/product.php?option=1&selPrdID=2&ln=2&selectBrtID=47&selectCatID=1280&selectDtlID=0

IXIL lists some....

http://www.ixil.com/suzuki.html

Jolly Moto
http://www.50cc.nl/2stroke_pleasure.htm?Jollymoto_4stroke_products.asp~TsMain

Mr. Eds has a REMUS Exhaust.....

http://mredsmoto.com/exhaust/remus_suzuki.html

PitterB4 · « **Reply #1 on:** March 10, 2005, 09:06:55 AM »

Thanks, Pete. I've contacted Laser a couple times to ask about the B4 system. They never responded.

A year or so ago on the old board, Jason Larrow found a distributor in NY that had the Laser systems available aluminum for $500 and CF for $550. Here is the thread.

gunter · « **Reply #2 on:** March 15, 2005, 10:06:16 PM »

Great links, but are there any aftermarket exhausts that don't cost 1/3 the value of the bike for us cheap basterds out here??

Red01 · « **Reply #3 on:** March 15, 2005, 10:19:57 PM »

If you cut off your stock muffler, just about any aftermarket can with the same size pipe inlet will fit, so you can start cruising the m/c junk yards...

PitterB4 · « **Reply #4 on:** March 15, 2005, 10:30:10 PM »

Quote

Great links, but are there any aftermarket exhausts that don't cost 1/3 the value of the bike for us cheap basterds out here??

Full systems? Uh, no. There's not much of a market for an exhaust for a 10+ year old, low volume bike. You can always cut off your can and just replace it with a slip-on.

Thief400 · « **Reply #5 on:** March 15, 2005, 10:46:48 PM »

Keep an eye on ebay. I check everyday, I picked up 2 yosh pipes last year. Yoshimura, Jardin, and Vance & Hines were the 3 who did make full pipes for the Bandit back in the 90's

gunter · « **Reply #6 on:** March 16, 2005, 08:41:23 PM »

Sorry guys, should have been more specific.
I am looking for a slip-on, not a full system. Think I'll take Red's advice and troll the local mc junk yard... I have been checking Ebay latley, but most of the so called slip-on cans are really bolt-on ones that only fit specific late model bikes.